The Timer; Setting The Clock - Sony PMC-20 Operating Instructions Manual

The Timer

Setting the clock

"AM 12:00" indication flashes in the
display until you set the clock.
Tip
The time display
system:
12-hour system
DISPLAY
ENTER MEMPRY
Before you begin, hook up the system (see pages 23 -
24).
1
Press CLOCK for 2 seconds until the hour digit
flashes.
2
Press TUNING/TIME SET + or – until you set the
current hour. Then press DISPLAY•ENTER
MEMORY.
The minute digits flash. Set the minutes by
pressing TUNING/TIME SET + or – until the
correct minute is displayed.
3
Press DISPLAY•ENTER MEMORY.
The clock starts from 00 seconds.
TUNING/
TIME SET +, –
CLOCK
/
19
The Timer