Table of Contents
Advertisement
Quick Links
CONTENTS
Safety Precautions
Chapter 1
Poduct Description............................................... 1
1.1 Introduction....................................................................... 1
1.2 Applicable Occasions........................................................ 1
1.3 Components of the Product............................................... 2
1.4 Main Features.................................................................... 3
Chapter 2
Operating Instructions of AGT600 Transmitter..................... 4
2.1 Components`Names.......................................................... 4
2.2 The Description of Display Interface ............................... 5
2.3 Introduction of Keys.......................................................... 6
2.4 Operating Instructions....................................................... 7
2.4.1 Advance Preparation................................................... 7
2.4.2 Power On/Off.............................................................. 8
2.4.3 The Way of Carrying Transmitter................................ 9
2.4.4 Mute Mode.................................................................. 9
Advertisement
Table of Contents
Summary of Contents for Array electronic AGT600
-
Page 1: Table Of Contents
1.2 Applicable Occasions............1 1.3 Components of the Product..........2 1.4 Main Features..............3 Chapter 2 Operating Instructions of AGT600 Transmitter..... 4 2.1 Components`Names............4 2.2 The Description of Display Interface ....... 5 2.3 Introduction of Keys............6 2.4 Operating Instructions............7 2.4.1 Advance Preparation........... - Page 2 2.4.5 Battery Capacity Indicator.......... 9 3.4.4 Volume Adjustment...........21 2.5 Transmitter`s Function Setting........10 3.4.5 Digital Mute Mode............21 2.5.1 Default Setting............10 3.4.6 Battery Capacity Indicator.........22 2.5.2 Channel Setting............11 3.4.7 Quick Channel Selection...........23 2.5.3 Sensitivity Setting............. 12 3.5 Receiver`s Function Setting...........23 2.5.4 User-selectable Frequency Setting......
-
Page 3: Introduction
The UHF Tour Guide System AG600 series is a portable, observe to ensure your own personal safety, as well as to protect high- performance, wireless system composed of the AGT600 the product and connected equipment. They are marked as body-pack Transmitter and AGR600 body-pack Receiver. -
Page 4: Components Of The Product
1.3 Components of the Product 1.4 Main Features AGT600 body-pack transmitter Portable, exquisite, stylish and user-friendly streamline design. AGR600 body-pack receiver Adopting UHF system and 700-960MHz professional frequency with high anti-interference. 1.2V (such as NI-MH, 1300mAH)*2 AA type rechargeable PLL synthesized design, and higher frequency stability. -
Page 5: Operating Instructions Of Agt600 Transmitter
⑧ SET key Charging contact ⑨ Battery compartment LCD Display AGT600 is a portable body-pack transmitter, which can be ⑩ Battery cover Accessories` slot easily worn on the waistband or on the front of chest. This transmitter has six selectable channels and a user-selectable channel. -
Page 6: Introduction Of Keys
2.3 Introduction of keys to select the menu clockwise to select the menu counterclockwise. Pressing keys simultaneously can display the Keys Mode Function present frequency of the current channel. If press keys simultaneously again at this time, or no key Standard display Enters the operation menu operation has occurred in 10 seconds,the screen will... -
Page 7: Power On/Off
2.4.3 The Way of Carrying Transmitter 1. Wear the lavalier microphone or head- set microphone. 2. Clip the transmitter over the proper position of waistband through the metal clip 3． Plug the headset microphone, lavalier microphone or on the rear panel of external audio input (such as MP3 player etc.) to the the transmitter, or microphone/audio input jack ②. -
Page 8: Transmitter`s Function Setting
If the batteries are not replaced immediately when the battery Press“SET”key to enter the operation menu when the screen capacity indicator is 0 segment,the battery indicator`s frame is in standard display. Shown as follow: begins fl ashing along with the red power status indicator to warn you that the batteries capacity is used up. -
Page 9: Sensitivity Setting
2.5.3 Sensitivity Setting 2.5.4 User-selectable Frequency Setting During the screen in operation menu, press key to make During the screen in operation menu, press key to make the“MHz”indicator blink, then press“SET”key to enter the user- the“SENSIT”indicator blink, then press “SET”key to enter the selectable frequency setting mode and the last set frequency value is sensitivity setting mode. -
Page 10: Pilot Mode Setting
2.5.6 Pilot mode setting Chapter 3 Operating Instructions of During the screen in operation menu,press key to make The AGR600 Receiver the“ ”indicator blink,then press“SET”key to enter the pilot mode setting.If the display shows“OFF”,it indicates the pilot mode is disabled; if the display shows“ON”,it indicates the AGR600 is a portable body-pack receiver, which can be easily transmitter is in pilot mode now. -
Page 11: The Description Of Display Interface
3.2 The Description of Display Interface Selection keys Battery cover latch ⑦ ⑧ SET Key Charging contact ⑨ Battery compartment LCD Display The standard display is shown as follow when the receiver has ⑩ Battery cover Accessories`slot turned on: The red power status indicator ⑤... -
Page 12: Introduction Of Keys
3.3 Introduction of keys to select the menu clockwise to select the menu counterclockwise. When the keyboard lock function is disabled, pressing Keys Mode Function any key will turn the backlit lamp on. If no key operation has occurred in 15 seconds, the backlit lamp will turn off. Standard display Enters the operation menu Press “ESC”... -
Page 13: On/Off System
3.4.3 The Way of Carrying Receiver Clip the receiver over the proper position of waistband through the metal clip on the rear panel of the receiver,or hang the 3. Plug the earphone to the audio output jack ③,and the receiver on the front of the chest standard caliber of the earphone`s plug is 3.5mm. -
Page 14: Battery Capacity Indicator
3.4.6 Battery Capacity Indicator 3.4.7 Quick Channel Selection When the red power status indicator ⑤ has turned on after the Press keys under the standard display interface receiver is normally enabled, the display will show the current directly can change the currently tuned channel quickly when battery capacity. -
Page 15: Channel Setting
User-selectable 3.5.2 Channel setting Channel Frequency Setting During the screen in operation menu, press key to Squelch Level mi Level Pilot mode make the“CHAN”indicator blink, then press “SET”key to enter the channel setting mode. Keyboard Lock The desired channel can be selected by pressing key. -
Page 16: User-Selectable Frequency Setting
3.5.4 User-selectable Frequency Setting 3.5.5 Pilot mode setting During the screen is in operation menu, press key to During the screen is in operation menu, press key to make the“MHz”indicator blink, then press“SET”key to enter the make the“ ”indicator blink, then press“SET”key to user-selectable frequency setting mode and the last set frequency enter the pilot mode setting If the display shows“OFF”,it value is shown on the display. -
Page 17: Lock Mode Setting
3.5.6 Lock Mode Setting Chapter 4 Troubleshooting During the screen is in operation menu, press key to make the“ ”indicator blink, then press“SET”key to enter the lock mode.If the display shows“ON”, it indicates the receiver is in lock mode now; if the display shows“OFF”, it indicates that the lock mode is disabled. -
Page 18: Chapter 5 Suggestions And Maintenance
Chapter 5 Suggestions and Problems Possible reasons Solutions Maintenance The pilot mode of Disable the pilot mode There is no the receiver is of the receiver, or enable sound when the enabled, while the the pilot mode of the RF signal is transmitter`s is transmitter 1. -
Page 19: Chapter 6 Technical Parameters
Transmitter: Chapter 6 Technical Parameters Modulation Frequency Range 854MHZ —— 865MHZ Receiver: Output Power 10mW Number of Channels Frequency Response 100HZ —— 12KHZ Frequency Range 854MHZ —— 865MHZ Adjacent Channels System Distortion <1% >70dB Rejection Power Two 1.5V AA batteries Frequency Response 100HZ ——...
Need help?
Do you have a question about the AGT600 and is the answer not in the manual?
Questions and answers