Summary of Contents for Therma-tek TSP18
- Page 1 STOCK POT OWNERS MANUAL AND INSTALLATION INSTRUCTIONS TSP18 TJBSP18 TSP18-2 TSP36 LISTED Made in U.S.A...
-
Page 3: Introduction/ Safety Precautions
INTRODUCTION/ SAFETY PRECAUTIONS Thank you for choosing your new THERMA-TEK Equipment. Our Products are designed to be safe and reliable when properly cared for and used reasonably. Your service agency or dealer recommends periodic inspections. Installation, maintenance, and repairs should be performed by your local authorized service agency. -
Page 4: Installation And Safety Guidelines
National Fuel Code ANSI Z223.1 (latest edition). All THERMA-TEK appliances are shipped with a gas pressure regulator packed with the unit. All units are adjusted, tested, and inspected at the factory prior to shipment. -
Page 5: Air Supply And Ventilation
INSTALLATION AND SAFETY GUIDELINES CLEARANCES • The unit must be kept clear of all combustibles. • The unit must be installed with the 6” legs supplied for proper operation. • Minimum clearance from combustible construction: • Side Back 12” 12” •... - Page 6 The gas supply (service) line must be at least the same size or larger than the inlet line of the appliance. THERMA-TEK counter equipment is supplied with a ¾” NPT Schedule 40 inlet. Sealant on all pipe joints must be resistive to LP gas.
-
Page 7: Initial Start-Up
INITIAL START-UP All THERMA-TEK appliances are adjusted and tested before leaving the factory. Adjustments and calibrations may be necessary upon installation to meet local conditions, low gas characteristics, problems caused by rough handling or vibration during shipping, and are to be performed only by qualified service personnel. -
Page 8: Care And Cleaning
CARE AND CLEANING Any piece of equipment works better and lasts longer when properly maintained. Cooking equipment is no exception. Your THERMA-TEK appliance must be kept clean during the workday and thoroughly cleaned at the end of the day. STOCK POT •... -
Page 9: How To Obtain Service
HOW TO OBTAIN SERVICE For warranty service, contact your local THERMA-TEK authorized service agency. Provide him with the Model #, Serial #, date of installation, and a brief description of the problem. If you need assistance locating the authorized service agency in your area, contact your local dealer. He will have a listing of authorized www.therma-tek.com... - Page 10 PRICES: All prices are subject to change without notice. Prices do not include sales or any other local state tax. All prices are in U.S. Dollars. TERMS: Net 30 days subject to Therma-Tek credit department approval. All amounts past due are subject to 1 1⁄2% per month service charge LIMITED WARRANTY: TWO (2) YEAR PARTS AND LABOR FOR U.S.
- Page 11 THIS PAGE LEFT INTENTIONALLY BLANK...
- Page 12 115 Rotary Drive, West Hazleton, PA 18202 www.therma-tek.com info@therma-tek.com 877-THERTEK (843-7835) Tel: (570) 455-3000 Fax: (570) 455-9491 A Division of TEKMA Corporation 7700 NW 37th Avenue Miami, Florida 33147...
Need help?
Do you have a question about the TSP18 and is the answer not in the manual?
Questions and answers