Phoenix Controls PCM Series Manual

Phoenix Controls PCM Series Manual

Lonmark programmable control module

Advertisement

The Phoenix Controls Programmable Control Module (PCM) series
provides a means of connecting additional inputs and outputs to the
®
®
Celeris
, Theris
and Traccel
custom control sequences to enhance the control functions already
provided. The PCM offers varying numbers of configurable input and
output connections, a graphical programming interface for developing
custom control applications. The PCM adds tremendous power and
flexibility to the Phoenix Controls environmental control system. The
graphical programming interface makes developing custom control
sequences simple and efficient.
FEATURES
• Interfaces with Celeris, Theris and Traccel room-level networks
• 4, 6, 10 and 12 universal inputs
• 6, 8 and 12 universal/digital outputs
• Graphical block-oriented programming
• DIN rail mounting (all but PCM200)
• Separable housing allows removal of controller from wiring base

SPECIFICATIONS

Enclosure
• ABS type PA-765A tan enclosures with gray connectors
Dimensions
• PCM200-4.8" x 5.9" x 2.5" (122.5 x 149.1 x 63.0 mm)
• PCM201-5.7" x 4.7" x 2.0" (144.8 x 119.4 x 50.8 mm)
• PCM202-5.7" x 4.7" x 2.0" (144.8 x 119.4 x 50.8 mm)
• PCM203-7.7" x 4.7" x 2.0" (195.6 x 119.4 x 50.8 mm)
Approximate Weight
• PCM200-1.01lbs (0.45kg)
• PCM201-0.97lbs (0.44kg)
• PCM202-0.97lbs (0.44kg)
• PCM203-1.17lbs (0.53kg)
Environmental
°
• Operating temperature 32
°
• Storage temperature -4
F to 158
• Relative humidity 0 to 90% non-condensing
Power Inputs
• Voltage 24 Vac; ±15%, 50/60 Hz (PCM200 only)
• Voltage 24 Vac/Vdc; ±15%, 50/60 Hz (PCM201, PCM202, PCM203)
• Must be powered by a 24 Vac, Class 2 power supply
• Power supply polarity must be maintained
Power Consumption
18 VA (typical) / 85 VA (maximum)
18 VA (typical) / 25 VA (maximum)
18 VA (typical) / 33 VA (maximum)
25 VA (typical) / 50 VA (maximum)
General Specifications
®
®
• Processor: Neuron
3150
• Memory: Non-volatile Flash 64K (APB application)
- Non-volatile Flash 128K (Storage)
®
• Communication: LonTalk
protocol
• Channel: TP/FT-10; 78 Kbps
• Transceiver: TP/FT-10; 78 Kbps
75 Discovery Way
Acton, MA 01720
©2009 Phoenix Controls. Specifications subject to change without notice. Rev. 11/11
P
ROGRAMMABLE
®
room-level network and developing
°
°
°
F to 158
F (0
C to 70
C)
°
°
°
F (-20
C to 70
C)
3 A removable fuse
1.85 A auto-reset fuse
1.85 A auto-reset fuse
2.5 A auto-reset fuse
; 8 bits; 10 MHz
Tel (978) 795-1285
C
ONTROL
Programmable Control Module (PCM)
General Specifications (continued)
• Clock: Real-time clock chip
• Battery (for clock only): CR2032 Lithium (for clock)
• Status indicator:
- Green LEDs: power status and LON TX
- Orange LEDs: service and LON RX
• Communication Jack: LON
1.
P
CM200 and PCM201 do not have a clock function
2.
All except PCM200
Inputs/Outputs
Type and quantity of I/O are determined by model number. For
details on I/O, see the Selection Guide on pages 3 and 4.
Agency Compliance
Electromagnetic Compatibility:
CE:
-Emission:
-Immunity
FCC:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
Agency Approvals
UL Listed (CDN and US):
UL916 Energy management equipment
Material:
UL94-5VA

TABLE OF CONTENTS

Specifications............................................................ 1
Ordering Guide........................................................ 2
Applications ............................................................. 3
Installation ............................................................... 4
Wiring...................................................................... 6
Recommended Cables .............................................. 9
Troubleshooting ..................................................... 10
Fax (978) 795-1111
P
MKT-0244
MPC-1673
ROGRAMMABLE
M
:
ARK ®
ODULE
L
M
ON
1
1
2
2
®
audio jack mono 1/8" (3.5 mm)
EN61000-6-3: 2001; Generic standards
for residential, commercial and light-
industrial environments
EN61000-6-1: 2001; Generic standards
for residential, commercial and light-
industrial environments
www.phoenixcontrols.com
C
M
: L
M
ONTROL
ODULE
ON
1
ARK

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PCM Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Phoenix Controls PCM Series

  • Page 1: Table Of Contents

    Troubleshooting ............. 10 • Transceiver: TP/FT-10; 78 Kbps 75 Discovery Way • Acton, MA 01720 • Tel (978) 795-1285 • Fax (978) 795-1111 • www.phoenixcontrols.com ©2009 Phoenix Controls. Specifications subject to change without notice. Rev. 11/11 MKT-0244 MPC-1673 ROGRAMMABLE ONTROL ODULE...
  • Page 2: Pcm200

    Ni1000 (1 K—Range -40 F to 302 F (-40 C to 150 • Potentiometer: Translation table configurable on several points Input Resolution: 16-bit analog/digital converter ROGRAMMABLE ONTROL ODULE MKT-0244 MPC-1673 ©2009 Phoenix Controls. Specifications subject to change without notice. Rev. 11/11...
  • Page 3: Applications

    PCM203 only. APPLICATIONS The Phoenix Controls PCM is a programmable input/output module that may be used as: • A standalone controller Physical sensors and switches may be connected to the PCM, which then performs the desired control by using built-in functions (see section below) to switch or modulate PCM outputs.
  • Page 4: Installation

    .43" .40" (11 mm) (10 mm) 7.48” (190 mm) Bracket Mounting Kit .12” (3 mm) 2.13” (54 mm) Figure 1. PCM200 Programmable Control Module ROGRAMMABLE ONTROL ODULE MKT-0244 MPC-1673 ©2009 Phoenix Controls. Specifications subject to change without notice. Rev. 11/11...
  • Page 5 Figure 2. PCM201/PCM202 Programmable Control Module Figure 3. PCM203 Programmable Control Module ©2009 Phoenix Controls. Specifications subject to change without notice. Rev. 11/11 MKT-0244 MPC-1673 ROGRAMMABLE ONTROL ODULE...
  • Page 6: Wiring

    100 VA is required. • Each pressurization zone should have either a dedicated single-phase primary circuit, or a secondary circuit disconnect • Use cable sizes recommended by Phoenix Controls (see Table 1). Fuse • Use stranded wire for ease of installation.
  • Page 7 • Output connections are on the right side of the control module. See Figure 6 for wiring configuration. Note: Multiple power sources may be present. Insure that all power is removed before handling bare conductors. ©2009 Phoenix Controls. Specifications subject to change without notice. Rev. 11/11 MKT-0244 MPC-1673...
  • Page 8 PMC201 INPUTS PORT PMC202 INPUTS LON2 LON1 PMC203 OUTPUTS C3-4 PORT PMC203 INPUTS C1-2 24 Vac 24V C OM PCM200 OUTPUTS Figure 6. Electrical Connections ROGRAMMABLE ONTROL ODULE MKT-0244 MPC-1673 ©2009 Phoenix Controls. Specifications subject to change without notice. Rev. 11/11...
  • Page 9: Recommended Cables

    5: Green 6: Yellow 7: Blue 8: Brown Required for high-speed electric actuation. Must be wired as a home run or star configuration, not daisy-chained. ©2009 Phoenix Controls. Specifications subject to change without notice. Rev. 11/11 MKT-0244 MPC-1673 ROGRAMMABLE ONTROL...
  • Page 10: Troubleshooting

    Configuration problem Using the controller configuration plug-in, check the configuration of the input. Refer to the controller's user guide for more information. 10 P ROGRAMMABLE ONTROL ODULE MKT-0244 MPC-1673 ©2009 Phoenix Controls. Specifications subject to change without notice. Rev. 11/11...
  • Page 11 Part Number Replacement fuse kit—includes seven five-amp main power fuses and three 500 mA input/output fuses 260-000-018 Replacement battery kit—includes 25 CR2032 lithium batteries 250-220-374 ©2009 Phoenix Controls. Specifications subject to change without notice. Rev. 11/11 MKT-0244 MPC-1673 ROGRAMMABLE ONTROL...

This manual is also suitable for:

Pcm200Pcm201Pcm202Pcm203

Table of Contents