Do you have a question about the TCD70ASA and is the answer not in the manual?
Questions and answers
Julie
May 7, 2025
The dryer drum is not turning over, not spinning.
1 comments:
Mr. Anderson
May 18, 2025
Possible causes of the TECO TCD70ASA dryer drum not turning or spinning include:
1. The drum is being accessed while moving—wait until it stops completely before reaching in. 2. The lint filter is blocked—clean it after each load. 3. Exhaust outlets are obstructed. 4. Insufficient ventilation. 5. A garment is obstructing the filter. 6. The dryer may have overheated due to any of the above issues, triggering a safety mechanism.
If these checks do not resolve the issue, servicing by an authorised technician may be required.
This answer is automatically generated
Joanne Ashworth
March 11, 2025
My Door won't lock in place & the little lock bits have snapped off.. where can I order this part to replace on door to lock it please
Page 1
7Kg AUTO SENSING VENTED CLOTHES DRYER USER’S MANUAL Model : TCD70ASA To ensure proper use and your safety, please read the following user manual completely before operating this appliance. Please keep this manual in a safe place for future reference.
Congratulations and thank you for purchasing a TECO product and for placing your confi dence in us. All images and diagrams contained within this manual are for illustration purposes only. SAFETY PRECAUTIONS Warning - To reduce the risk of fi re, electric shock, or personal injuries, the following basic precautions should be followed.
Page 3
● Do not sit on top of the dryer. ● If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualifi ed persons in order to avoid a hazard. ● Always disconnect dryer from electrical supply before attempting any service. ●...
TABLE OF CONTENTS Safety Precautions ....2 - 3 Table Of Contents ....Identifying Dryer Parts ....Installation ....5 - 6 Before First Use & Drying Tips ....Control Panel ....Operating Instructions ....7 - 8 Program Information Table ....
IDENTIFYING DRYER PARTS 1 - Cabinet 2 - Control Panel 3 - Door 4 - Lint Filter 5 - Air Vent 6 - Drum 7 - Power Cord 8 - Adjustable Feet INSTALLATION Please install your clothes dryer according to the instructions below for correct operation, optimal performance and safety.
STEP 2 : Connect the Power 1. Connect the power plug to the mains power outlet. 2. Switch mains power to ON. Note: Do not connect the clothes dryer to an extension cord or multiple power board. WARNING: Never operate electrical equipment with wet hands to avoid injury, electric shock or damage to the appliance.
CONTROL PANEL 1 - Anti-Crease Button 2 - Dryness Selection Button 3 - Program Selection Button 4 - Start/Pause Button 5 - On/Off Button 6 - Child Lock Indicator OPERATING INSTRUCTIONS STEP 1 : Before placing items into the dryer, ensure the power cord is securely plugged into the mains power source and switched on (refer to the installation instructions on Pages 6 &...
Please Note: The table above is intended as a guide only and results may vary. TECO are not liable for incorrect use of this appliance. Please read and follow washing/drying instructions attached to each item before placing in the dryer.
CLEANING & MAINTENANCE Always disconnect the clothes dryer from the mains power source before performing any maintenance or cleaning of the appliance. CAUTION For optimal performance, regular maintenance and cleaning is highly recommended. Regular maintenance and cleaning will extend the service life of the ...
If the clothes dryer does not perform as expected or malfunctions, please check the following list of possible solutions. If a solution can not be found or the problem persists, please contact TECO service (refer to Page 11). Do not, under any circumstance, dismantle the appliance.
If you have a problem, and the problem persists after you have made the checks mentioned in the Troubleshooting section (page 10) of this manual, contact: TECO Australia Service on 1300 660 037 (9am to 4pm AEST Mon to Fri) For warranty details please visit www.teco.com.au Complete and retain the following information:...
SPECIFICATIONS TCD70ASAMDBF Model Rated Input Power 2000 Classifi cation of Use Indoor use only Rated Total Gross Volume (Kg) Voltage (V) 220~240 Frequency (Hz) Motor Output Power (W) Height Dimensions Width (mm) Depth Net Weight (Kg) IPX4 IP rating NOTE: This product is subject to continuous improvement, specifi cations are subject to change without prior notice.
Need help?
Do you have a question about the TCD70ASA and is the answer not in the manual?
Questions and answers
The dryer drum is not turning over, not spinning.
Possible causes of the TECO TCD70ASA dryer drum not turning or spinning include:
1. The drum is being accessed while moving—wait until it stops completely before reaching in.
2. The lint filter is blocked—clean it after each load.
3. Exhaust outlets are obstructed.
4. Insufficient ventilation.
5. A garment is obstructing the filter.
6. The dryer may have overheated due to any of the above issues, triggering a safety mechanism.
If these checks do not resolve the issue, servicing by an authorised technician may be required.
This answer is automatically generated
My Door won't lock in place & the little lock bits have snapped off.. where can I order this part to replace on door to lock it please