Xantech XT-4K-VIP-TX Quick Reference Manual

®
XT-4K-VIP-TX/RX
Introduction
The Xantech Premium Video over IP (VIP) platform enables distribution of HDMI video over a 1Gb Network switch.
The XT-4K-VIP-TX and XT-4K-VIP-RX are HDCP 2.2 compliant Transmitters and Receivers that use visually lossless
compression technology to deliver HDMI, Bi-directional IR, RS-232 and USB/KVM up to lengths of 100m over standard
network architecture. The XT-4K-VIP-TX/RX can be powered via PoE from a Network switch or powered locally should
a switch either not be used or not support PoE. With multiple configuration options available, this Video over IP solution
is ideal for both commercial and residential installations.
Features
• Advanced UHD video over 1Gb Network
• Virtually unlimited system size
• Connect to any supported Layer 2 / Layer 3 Managed Switch for HDMI video distribution
• Supports up to 4K HDR UHD video (3840 x 2160 @ 30Hz 4:4:4, 4096 x 2160 @ 24Hz 4:4:4, and 4K @ 60Hz
4:2:0)
NOTE: HDR support is dependant on video signal bandwidth. Please see table in product manual for reference
• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio
transmission
• Video up-scaling and down-scaling
• Features 4 operational modes:
- Matrix distribution (Requires 1Gb network switch)
- Video wall (Requires 1Gb network switch)
- One-to-one HDMI extender (No network switch required)
- One-to-many HDMI splitter (No network switch required)
• HDCP 2.2 Compliant
• Advanced EDID management
• Analog L/R audio embedding and de-embedding on XT-4K-VIP-TX Transmitter
• Analog L/R audio breakout on XT-4K-VIP-RX Receiver
• Bi-directional RS-232 and IR pass through
• USB 2.0 connectivity (backwards compatible with USB 1.1) for KVM and other USB devices
• PoE (Power over Ethernet) to power Xantech products from PoE switch
• Local 24V 1A power input should network switch not support PoE, sold separately
• Simple configuration via web-GUI through the XT-4K-VIP-ACM
• HDMI audio embedding supports up to 192 Khz, XT-4K-VIP-RX analog audio output supports up to 96Khz only
• RS-232, IR and Telnet/IP integration for control of the VoIP system using Xantech XT-4K-VIP-ACM
Settings
Default IP Address: 169.254.100.254 (TX & RX)
Username: xantech
Password: 1234
Important Note:
The Xantech Premium Video over IP (VIP) platform distributes HDMI video over 1GB Managed network hardware.
It is advised that Xantech VIP products are connected on an independent network switch to prevent unnecessary
interference, or reduction in signal performance due to the bandwidth requirements of other network products.
Please read the full product manual (available to download online at www.xantech.com) and ensure that the
network switch is configured correctly prior to connecting any Xantech VIP products. Failure to do so will result in
problems with configuration of the system and/or video performance.
© 2019 XANTECH is a registered trademark of Nortek Security and Control, LLC.
®

Quick Reference Guide

XT-4K-VIP-TX/RX QUICK REFERENCE GUIDE
10023196_RevA10_Quick_Reference_Guide_Xantech_XT_4K-VIP_TXRX_1005_WEB