Programming The Cd Tracks - Sony MHC-GRX2 Operating Instructions Manual

Programming the CD tracks

(continued)
To
Check the
program
Clear a track from
the end
Clear a specific
track
Add a track to the
program
Clear the entire
program
20
Press
CHECK on the remote
repeatedly. After the last
track, "CHECK END"
appears.
CLEAR on the remote in
stop mode.
CHECK on the remote
repeatedly until the
number of the track to be
erased appears, then press
CLEAR.
1 Press one of the DISC
1 – 3 buttons or DISC
SKIP to select a CD.
2 Select the track by
pressing = or +.
3 Press ENTER/NEXT.
p once in stop mode or
twice while playing.
Tips
• The program you made remains in the CD player
even after it has been played back. Press CD (P
to play the same program again.
• If the total playing time does not appear while
programming, this means:
– you have programmed a track number
which exceeds 20, or
– the total playing time has exceeded 100 minutes.
• "FULL" appears when you try to program over 32
tracks.