Download Print this page

Hamilton/Buhl PLCAB5434E Instructions

Flat panel tv cart

Advertisement

Quick Links

Instructions
Flat Panel TV Cart
Model #: PLCAB5434E
Warranty begins the date that the item ships out of our warehouse. Metal carts have a
limited lifetime warranty on all housing components; however, carts have a one year
warranty on any electrical/mechanical components.
Note: This unit is easier to assemble with two people.
Qty. Description
1
Top shelf with decal
1
Middle shelf
1
Bottom shelf
4
Top legs
2
Bottom legs (Labeled "O")
2
Bottom legs (Labeled "X")
1
Cabinet shelf
4
Shelf support
2
Horizontal mount
1 Set Pull out shelf
Pole

Parts list

Qty. Description
2
Side panels
1
Rear panel
1
Right door assembly
1
Left door assembly
2
Casters with brakes
2
Casters without brakes
1
Electrical bracket
1
Power cord
6
Screws (M)
Tools required
Hex wrench
L key
Adjustable wrench/pliers
Horizontal mount
Rubber mallet
( Instructions continued on next page )
Qty.
Description
5 Set Screws, washer and hex nuts (L)
17 Set Square head bolts,washer and serrated nuts (I)
17 Set Machine screws and serrated nuts (J)
13 Set Screws and washer (K)
3 Set Screws and serrated nuts (E)
2
Security screws for mounting the poles (F)
2
Security screw (G)
2
Hex head screw (H)
2
Poles for supporting flat panel TV
WARNING:
TV mounting screws A,B,C & D
and the L keys in a secure
location as they may be required
for use with the flat panel TV at
a later time.
PLCAB5434E
Screw table
Some screws may have already
screwed on the related parts.
Please keep the
Page 1

Advertisement

loading

Summary of Contents for Hamilton/Buhl PLCAB5434E

  • Page 1: Parts List

    Instructions Flat Panel TV Cart Model #: PLCAB5434E Warranty begins the date that the item ships out of our warehouse. Metal carts have a limited lifetime warranty on all housing components; however, carts have a one year warranty on any electrical/mechanical components.
  • Page 2 Lay two bottom legs marked "O" and "X" on floor with bracket Insert top legs (legs with no wing bracket) onto top shelf (biggest facing inward. Make sure holes on the legs are facing up and shelf with decal). Make sure the holes are facing from front to down.
  • Page 3 Put the top section assembly over the bottom section at desired height. Tighten the top section onto the bottom with two screws Insert the two supporting poles onto the holes on top shelf. Wire (see screw table J) on each leg as shown. holes can face inside or outside.