Safety Notes
1-9. Procedure to re-assemble Rear Cover
Assemble rear cover as a direction
Alignment: Bottom right corner
1. Assemble rear cover as a
direction
5. Tighten all screw for rear
cover, reflector, AC cover &
stand joint screw except four
j
p
stand screw
2. Lay down rear cover top side
to assemble
6. Connect AC cord connector, install AC cover
& tighten the screw
3. Check all side whether its
p p
properly insert
y
7. Put stand as direction and tighten
7 Put stand as direction and tighten
four stand screw
RB1G
CHASSIS
W900A/904A/905A
4. Put reflector left & right
10