SOREX wirelessKey 4.0
Quick starting guide
This quick starting guide explains the pairing process for a mobile phone with the installed wirelessKey
module and how to connect it to door opening systems. For installation advice and other instructions, please
refer to the user manual, which is available through our website www.sorex.eu or via the QR-Code above.
Pairing a mobile phone:
1. Switch Bluetooth of your mobile phone to on and set it to visible.
Please note: With some mobile phones it is necessary to remain in the Bluetooth settings and/or switch to
security mode.
2. Hold your mobile phone close to the SOREX wirelessKey 4.0 outdoor unit for at least 10 seconds.
After approximately 10 seconds, an incoming connection „add.SOREX-w.Key" or „Headset" will appear.
3. Enter your Tür-PIN
Enter the 10-digit Tür-PIN, which can be found on the sticker in the
enclosed envelope (see Figure 1), to build up a connection with
"add.SOREX-w.Key" or "Headset". After entering the Tür-PIN, your
mobile phone is paired with the SOREX wirelessKey 4.0.
4. Final step
Your mobile phone is now entitled to open your door. Some devices
ask to build up a connection automatically. This has to be confirmed.
Tip: Use the free smartphone-app "SOREX Bluetooth Door Opener" to set your smartphone's Bluetooth to
visible quickly and easily, by simply opening the app.
Please note: To connect portable transmitters and RFID media with the SOREX wirelessKey 4.0, the
management software has to be used. Mobile phones can also be paired via the management software.
SOREX
wireless Solutions GmbH
Technologie- und Forschungszentrum
Viktor-Kaplan-Straße 2,B
2700 Wiener Neustadt, Österreich
Bank
Raiffeisenbank Pittental
IBAN
AT223264700000052324
BIC
RLNWATW1647
PayPal
paypal@sorex-schliesssystem.com
Wir möchten Ihnen Türen öffnen
Figure 1: Exemplary sticker of
UID
ATU57865279
T
+43 2622 32013-0
@
w³
www.sorex-schliesssystem.com
Tür-PIN
F
-15
Need help?
Do you have a question about the wirelessKey 4.0 and is the answer not in the manual?
Questions and answers