Subscribe to Our Youtube Channel
Summary of Contents for Landis Fume Buster
- Page 1 Landis Fume Buster Space Saver (SKU: FB19) Operator Manual Manufactured by V 05/2018...
- Page 2 Operator Manual Landis Fume Buster Space Saver (SKU: FB19) INTRODUCTION The Landis Space Saver Fume Buster is a compact, durable machine designed to remove toxic airborn chemicals and odors from your work environment. It will deliver efficient, dependable service when used correctly and with care.
- Page 3 • A guard or other part that is damaged should be properly repaired or replaced. Do not perform makeshift repairs. (Use the parts list to order replacement parts.) • Do not move the fume buster by pulling the power cord. Landis International - 3...
-
Page 4: Specifications
INSTALLATION The Landis Fume Buster should be located on a flat, firm surface, in area free of obstructions that could interfere with the safe operation of the equipment. The left side of the machine should be 100 mm (4’’) distance from the wall. -
Page 5: Start-Up Instructions
Operator Manual Landis Fume Buster Space Saver (SKU: FB19) START-UP INSTRUCTIONS Before starting the Fume Buster, remove the charcoal filter, look inside the machine and remove all packaging around the black charcoal filter. Do not forget to take out the wooden piece. Put back the filter in place, throw away the plastic bag. - Page 6 Operator Manual Landis Fume Buster Space Saver (SKU: FB19) REPLACEMENT OF CHARCOAL WARNING: When pouring the new charcoal inside the filter be sure to shake the housing throroughly in order to compact the charcoal. The housing must be filled completely for maximum effiency.
- Page 7 Operator Manual Landis Fume Buster Space Saver (SKU: FB19) Note: You are sure that the charcoal is well packed inside the filter when you can’t see the light passing throught the metal container. Correct Not correct Landis International - 7...
-
Page 8: Grounding Instructions
Operator Manual Landis Fume Buster Space Saver (SKU: FB19) GROUNDING INSTRUCTIONS WARNING: Improper connection of equipement grounding conductor can result in the risk of electrical shock. Equipment should be grounded while in use to protect operator from electrical shock. • Check with a qualifed electrician if grounding instruction are not understood or if in doubt as to whether the tool is properly grounded. - Page 9 Operator Manual Landis Fume Buster Space Saver (SKU: FB19) • Green (or green and yellow) conductor in cord is the grounding wire. If repair or replacement of the electric cord or plug is necessary, do not connect the green (or green and yellow) wire to a live terminal.
-
Page 10: Extension Cords
Operator Manual Landis Fume Buster Space Saver (SKU: FB19) EXTENSION CORDS • The use of any extension cord will cause some drop in voltage and loss of power. • Wires of the extension cord must be of sufficient size to carry the current and maintain adequate voltage. - Page 11 • Shake the charcoal filters thoroughly this will help to extend the efficiency of the charcoal. LUBRICATION Your Landis Fume Buster is equipped with sealed bearings throughout, which should be replaced if they ever wear out. Other parts should not required any lubrication, only cleaning the parts is required.
-
Page 12: Troubleshooting
Operator Manual Landis Fume Buster Space Saver (SKU: FB19) TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE(S) CORRECTIVE ACTION Fume Buster won’t start 1. Blown line fuse or tripped 1. If fuse is blown, replace circuit breaker. with fuse of proper size. If 2. Low line voltage. - Page 13 Operator Manual Landis Fume Buster Space Saver (SKU: FB19) Accessories for Landis Fume Buster Space Saver PART DESCRPTION NUMBER REQUIRED Fume Buster 19’’ FB19 Space Saver Charcoal filter Replacement charcoal - CNS188 Bag of 25 pounds Prefilter 4’’ Conversion vented kit...
Need help?
Do you have a question about the Fume Buster and is the answer not in the manual?
Questions and answers