The Display - Sony LBT-LX10AV Operating Instructions Manual

Listening to the radio (continued)
1
Press TUNER/BAND repeatedly
until the desired band appears in

the display.

Each time you press this button, the
band changes as follows:
FM y AM
2
Press TUNING MODE repeatedly
until "PRESET" appears in the
display.
MANUAL t AUTO t PRESET
3
Press TUNING +/– (or PRESET +/–
on the remote) to tune in the desired
preset station.
Preset number*
ALL DISC S
* When only one station is preset,
"ONE PRESET" appears in the display.
To
Turn off the radio
Adjust the volume
To listen to non-preset radio
s t a t i o n s
Press TUNING MODE repeatedly in step 2
until "MANUAL" appears, then press
TUNING +/– to tune in the desired station.
16
Frequency
MHz
Do this
Press ?/1.
Turn VOLUME (or press
VOL +/– on the remote).
Tips
• Pressing TUNER/BAND while the system power
is off automatically turns on the system and tunes
in the last received station (One Touch Play).
One Touch Play is not available in Power Saving
mode.
• You can switch from another source to the radio
by pressing TUNER/BAND (Automatic Source
Selection).
• If an FM program is noisy, press STEREO/
MONO so that "MONO" appears in the display.
There will be no stereo effect, but the reception
will improve. Press this button again to restore the
stereo effect.
• To improve broadcast reception, move the
supplied antennas.
DOLBY NR
OFF
VOLUME
PRESET