Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for JML iWalk
- Page 1 The Family Treadmill...
-
Page 2: Table Of Contents
Thank you for purchasing iWalk™ The Family Treadmill from JML. To get the best results from this treadmill, please read these instructions in full and keep them safe for future reference. The Family Treadmill Contents Safety Warnings & Advice Manual Program... -
Page 3: Safety Warnings & Advice
Be sure to read the entire manual, warning labels and emergency stop procedure before assembly and operation of the iWalk. Provide attention to the following safety precautions: To ensure that iWalk is used safely and properly, all users must read this manual. Before starting any exercise program, consult your physician. - Page 4 DO NOT attempt to run backwards. DO NOT step or jump off the running belt while the iWalk is moving. Slow down and turn off first to to ensure a safe dismount. When unfolding to use, carefully open and rotate the back of the running belt towards the ground as it is heavy.
-
Page 5: Your Iwalk
Key is removed from the Control Panel, the iWalk belt will stop immediately. Plug your audio jack into your phone and the iWalk prior to turning on the iWalk. Plugging the audio jack into the iWalk while on, there will be an audible ‘fuzz’... -
Page 6: Before Use
Your iWalk™ The Family Treadmill Before Use Your iWalk is nearly ready-to-go out of the box. There are only a few things to assemble before you use. Ensure that you are in a As the iWalk is extremely heavy, carefully... -
Page 7: Assemble Your Iwalk
Your iWalk™ The Family Treadmill Assemble Your iWalk™ the Allen Key provided. Then place the Plastic Covers (D) over this. The Family Treadmill 4. Secure the Control Panel in place to the front of the Handlebars using the Control 1. Lift the beams up vertically, inserting the Panel Locking Pin (E). -
Page 8: Using Your Iwalk
1. Connect the plug to the power outlet. 4. Your iWalk is now ready to use. 2. Switch on the button at the base of the iWalk. This will illuminate to indicate that Your Control Panel... -
Page 9: Warm-Up & Preparation
3.5mm 500mm long double-ended audio cable. Warm-up & Preparation To help prevent injury, have a good posture while using the iWalk. For best results, wear footwear with high impact absorption and anti-slip features. To help avoid injury, ensure you warm-up and cool down to prepare your body for your... -
Page 10: Manual Program
2. Press the mode button. “standby mode.” 3. Press the speed +/- button to view the 3. Press the on/off button and the iWalk will pre-established programs. Select a begin working after 3 seconds. program (P1 to P6). -
Page 11: Pre-Set Program
Using your iWalk™ The Family Treadmill P1 and P2 beginners programs: P5 and P6 advanced programs: Characteristics: Low speed variations. Best Characteristics: High speed variations. If you to start at this level. have a high fitness level, these programs are for you. -
Page 12: After Use
Storing and folding your iWalk away safely: (see figure 3). 1. Remove the Vertical beams locking bolt 4. Now you can move your iWalk. Hold the by turning anti-clockwise (see figure 1). handlebars with both hands and lean the iWalk until the wheels touch the ground 2. -
Page 13: Cleaning & Care
Avoid prolonged contact with control panel. Only use a dry cloth. skin. Do not ingest. Avoid contact with eyes. DO NOT unplug your iWalk while it is in use. Wash hands after use. Place approx 5-10ml on both sides, also reaching towards the Turn off by pressing the On/Off button on centre to ensure a full spread. -
Page 14: Guarantee
Guarantee This product is unconditionally guaranteed for one year against all defects of workmanship and materials. This guarantee does not affect your statutory rights. If you have any problems or queries about this product please contact JML customer services. -
Page 15: Technical Information
Technical Information How often the running belt needs to be lubricated depends on how often the iWalk is used per week <3 hours per week Every 6 months 3-6 hours per week Every 3 months >6 hours per week Every month... - Page 16 Distributed by JML JML, Unit 1 Eastside, Port of Tyne, South Shields, NE33 5SP Customer Services: UK: 0800 781 7831 (Freephone) • ROI: 041-978 0003 (Local rate) Email: info@JMLgroup.co.uk • Web: www.JMLdirect.com ©JohnMillsLtd/HL/12.18/S001003/A • Made in China...
Need help?
Do you have a question about the iWalk and is the answer not in the manual?
Questions and answers
The treadmill is running of its own accord and the control panel is not working
The JML iWalk treadmill may be running on its own and the control panel may not be working due to the Magnetic Safety Key not being properly attached. The manual states that the clip of the Magnetic Safety Key must be attached to the magnetic part of the control panel for the treadmill to start and function correctly. If the key is not in place, the treadmill may not respond properly to controls. Additionally, if the key is removed while the belt is moving, the treadmill should stop immediately for safety reasons.
This answer is automatically generated
Is it possible to make the I walk flat? It is currently on a slight incline.
Can I buy a folding pin and 1 wheel for a iwalk treadmill?
Control panel is just saying safe when plugged in