8: Adjusting The Speaker Levels (Test Tone) - Sony HT-SS360 Operating Instructions Manual

8: Adjusting the speaker
levels
(TEST TONE)
You can adjust the speaker levels while
listening to the test tone from your listening
position.
0
CLEAR
DISPLAY
,V,v,B,b
RETURN/EXIT
1
Press AMP MENU.
"SET HDMI" appears on the display.
2
Press V/v repeatedly until
"LEVEL" appears, then press
or b.
3
Press V/v repeatedly until
"T. TONE" appears, then press
or b.
4
Press V/v repeatedly to select
"T. TONE Y", then press
The test tone is output from each speaker
in sequence as follows:
Front left t Center t Front right t
Surround right t Surround left t
Subwoofer
5
Press V/v repeatedly to select
the desired speaker, then press
or b.
The test tone is emitted from the speaker
that is being adjusted only.
• FL LVL: adjusts the front left speaker
level.
• CNT LVL: adjusts the center speaker
level.
26
US
AMP
AMP MENU
MENU
ENTER
TOOLS/
OPTIONS MUTING
TV VOL
MASTER VOL
MASTER
VOL +/–
MENU/HOME
• FR LVL: adjusts the front right speaker
level.
• SR LVL: adjusts the surround right
speaker level.
• SL LVL: adjusts the surround left
speaker level.
• SW LVL: adjusts the subwoofer level.
Notes
• "CNT LVL" does not appear when you set
"CNT N" in the "SP SETUP" setting.
• "SR LVL" and "SL LVL" do not appear when
you set "SUR N" in the "SP SETUP" setting.
6
Press V/v to adjust the speaker
level, then press
You can adjust from –6.0 dB to +6.0 dB
in 0.5 dB steps.
Note
If you do not adjust for a certain period, the test
tone is emitted from the next speaker in
sequence.
7
Repeat step 5 and 6 to adjust
the speaker level.
8
After you have finished making
adjustments, press V/v until
"T. TONE" appears, then press
or b.
9
Press V/v repeatedly to select
.
"T. TONE N," then press
10
Press AMP MENU.
The AMP menu turns off.
When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely.
• The speaker cords may have the short-circuit
problem.
• The test tone signals are not output from the
HDMI OUT jack.
or b.
.