Specifications - Sony HT-DDW750 Operating Instructions Manual

Home theater system
Hide thumbs Also See for HT-DDW750:
Table of Contents

Advertisement

Specifications

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
40 – 20,000 Hz; rated 90 watts per channel
minimum RMS power, with no more than
0.7 % total harmonic distortion from 250
milliwatts to rated output (Models of area code
U only).
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 40 Hz – 20 kHz, THD 0.7 %)
STR-K750P:
Reference Power Output
(8 ohms 1 kHz, THD 0.7 %)
STR-K750P:
Models of area code CEL,CEK
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
STR-DE495P:
Reference Power Output
(8 ohms 1 kHz, THD 0.7 %)
STR-DE495P:
Models of other area code
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
STR-K750P:
Reference Power Output
(8 ohms 1 kHz, THD 0.7 %)
STR-K750P:
Reference Power Output
(8 ohms 1 kHz, THD 10 %)
STR-K750P:
90 W + 90 W
1)
FRONT
:100 W/ch
1)
CENTER
: 100 W
1)
SURR
: 100 W/ch
2)
80 W + 80 W
2)
1)
FRONT
: 80 W/ch
1)
CENTER
: 80 W
1)
SURR
: 80 W/ch
2)
90 W + 90 W
2)
FRONT
1)
: 90 W/ch
1)
CENTER
: 90 W
1)
SURR
: 90 W/ch
2)
1)
FRONT
: 115 W/ch
1)
CENTER
: 115 W
SURR
1)
: 115 W/ch
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions:
Area code
E2/E3, AU
SP, CEL, CEK
MX
Frequency response
CD, MD/TAPE, DVD,
VIDEO 1, 2
Inputs (Analog)
CD, MD/TAPE, DVD,
VIDEO 1, 2
3) INPUT SHORT (with sound field and tone
bypassed).
4) Weighted network, input level.
Inputs (Digital)
DVD (Coaxial)
VIDEO 2 (Optical)
Outputs
MD/TAPE (OUT),
VIDEO 1
(AUDIO OUT)
SUB WOOFER
Tone
Gain levels:
Power requirements
240 V AC, 50 Hz
230 V AC, 50 Hz
120 V AC, 60 Hz
10 Hz – 50 kHz
+0.5/–2 dB (with sound
field and tone bypassed)
Sensitivity: 500 mV
Impedance: 50 kilohms
S/N
3)
: 96 dB
4)
(A, 500 mV
)
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
Voltage: 500 mV
Impedance: 10 kilohms
Voltage: 2 V
Impedance: 1 kilohms
±6 dB, 1 dB step
continued
GB
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents