Important ! This interface will only work with Sidepower electric thrusters with a S-link control system. The 8730 external switch interface allows the use of mechanical foot switches or other normally open switches to control a S-link bow thruster. In addition it allows for connecting the 8980/8985 radio remote control.
Cut here Fig. 1 STERN 8730B Wiring diagram: S-link 8730 Cut off wires from BOW connector Non-terminated wires RED BLACK RED GREY BLUE YELLOW Foot Switch Foot Switch Port Starboard RED BLACK RED GREY BLUE YELLOW Foot Switch Foot Switch Port Starboard Radio Remote...
Page 5
Using switch interface 8730 with other control units: The 8730 needs to be activated for the switch inputs to work. Connect the control signals to the 4 pin connector as shown on wiring diagram below. Solution 1: Use a joystick panel or retract panel to activate 8730 by turning the panel ON.
Page 7
We Sleipner Motor AS declare that these control panels complies with health and safety requirements according to the Directive 89/336/EEC of 23 May 1989 amended by 92/31/EEC and 93/68/EEC. Installation guide S-link external switch interface 8730 Page 7...
Need help?
Do you have a question about the S-Link 8730B and is the answer not in the manual?
Questions and answers