Page 2
Pitsco Wing Caddy (57246) or the Pitsco Foam Wing The Pitsco Wing Tester is designed to visually Cutter (17080) and test them on the Wing Tester to demonstrate the principle of lift and to evaluate see whose design is the most efficient.
Page 3
1. Slide the balance arm into the mounting socket balance arm so the on the top of the Wing Tester unit. Align the holes bracket ends face in the balance arm with the mounting socket the tester.
Page 4
Add a flap by taping a piece of card stock on the trailing edge of the wing. Bend the flap up and down to observe the aerodynamic effects. P.O. Box 1708 • Pittsburg, KS 66762 www.pitsco.com Toll-Free Orders 800-835-0686 Wing Tester User Guide 57205 V0311...
Need help?
Do you have a question about the Wing Tester and is the answer not in the manual?
Questions and answers