Summary of Contents for QUICKO T12 STC Series
- Page 1 T12 STC-OLED DIGITAL SOLDERING STATION USERMANUAL VER:1.4@2017618 OLED T12 QUICKO HEATING SOLDERING STATION Q U I C KO E L E C T RO N I C .,LT D http://www.quickochina.com...
-
Page 2: Operating Environment
Conventional safety Please use only the power adapter that is dedicated to the product and is certified by the country / area. Do not operate in a wet environment. Do not operate in a flammable and explosive environment. Please keep the surface of the product clean and dry. To protect your family and friends for the safety, please power off... -
Page 3: Parts List
Parts list ④ ③ ② ① ⑨ ⑤ OLED T12 QUICKO HEATING SOLDERING STATION ⑦ ⑥ ⑧ 1、T12-907 Handle 2、Socket of iron tip 3、Locking nut for iron tip 4、Lock tube for iron tip 5、Head of iron tip 6、Aviation Plug of handle 7、OLED temperature display... - Page 4 Parts list ⑩ Vibration prompt The current set temperature ② ③ STC usage Handle interface Front ① ⑤ ④ ⑥ Current voltage Inside temperature of Current working the machine temperature ⑦ Switch Back ⑨ ⑧ Power cord connector Fuse...
-
Page 5: Product Parameter
Product parameter Model number T12 STC-952 Display OLED Handle interface GX12-4pins Standard 510g Product weight Dimension of host 120*88*38mm Wire length of handle 1.1m T12 series Application iron tip Working parameter Time of melt tin <8S Max power 108W ℃ 200-480 Range temperature Voltage of power... - Page 6 install iron tip Socket of iron tip The second screens Locking nut The first screens Tighten Tsui tip sleeve The first step: remove the handle locking nut, insert the iron tip to iron head socket, let the second clamping and handle iron head socket is flat! The second step: Put the tube to the locking nut, let the nut and the tube from the iron head nozzle tip into the iron tip, the nut head and the iron tip is flat with first clamping, then tighten the nut, the installation is complete!
-
Page 7: Temperature Calibration
Menu use MENU 1.CALIBRATION 2.AUTOSLEEP 3.AUTOPOWEROFF MENU MENU 1.CALIBRATION 1.CALIBRATION 2.AUTOSLEEP 2.AUTOSLEEP 3.AUTOPOWEROFF 3.AUTOPOWEROFF Enter the menu setting interface: under the normal working temperature interface, long press the encoder button (about 3s). Enter the host setup mode! Exit menu settings interface: at the menu setting interface, long press the encoder button (about 3s), exit the host setup mode! Setting menu:... -
Page 8: Power Off Time
Sleeping time MENU AUTOSLEEP 1.CALIBRATION 2.AUTOSLEEP [01min] 3.AUTOPOWEROFF Choosing sleeping time feature, short press encoder, into the sleeping time setting, the time setting range: 0-99 minutes, if you don't need the sleeping time function, the dormancy feature can be set to OFF. Default sleeping time for 1 minute, means after 1 minute the host and handle is stand still, the soldering station will entry to dormant state, the temperature of soldering iron tip will drop ℃... - Page 9 Strengthening time MENU BOOSTDURATION 4.BOOSTDURATION 5.BOOSTDEGREE [30S] 6.WAKEUPMETHOD After choosing strengthen the time function, short press the encoder and enter the time setting. The time setting range: 0-99 minutes. The default time is 30 seconds, it can be set according as the actual needs, after setting, short press the encoder to confirm and exit.
-
Page 10: Buzzer Switch
Wake-Up type MENU POWEROFFWAKEUP 4.BOOSTDURATION 5.BOOSTDEGREE ENCODER&HANDLE 6.WAKEUPMETHOD POWEROFFWAKEUP [ENCODERONLY] After selecting the wake-up function, short press the encoder, enter setting of wake-up type, the system provides two kinds of wake-up type: encoder together with handle or just encoder. When choosing encoder + handle, the soldering station is automatic power off, shaking handle or short press or rotary encoder, all can wake-up the host! When choosing the encoder, the automatic shutdown state, short press or rotary encoder can wake-up the host, but shaking handle cannot wake-up the host! -
Page 11: Version Information
Battery guard MENU BATTERYPROTECT 7.BUZZERSWITCH 8.BATTERYGUARD AT[12.0V] 9.FIRMWARE According to the voltage environment of the host, built-in battery guard function of this soldering station, and the default voltage is 12V. When the voltage is not stable, the power supply will be supercharged according to the setting. Usually don't need to set it. The setting range is 12V-24V. - Page 12 How to choose the iron tip Note: Choosing the right iron tip can make the work more efficient.
- Page 13 Iron tips maintenance 1.Please put appropriate tin on the adhering head of iron tip Before powering off , and please clean it before welding. 2.Do not allow the iron tip to stay at high temperature for a long time to avoid dry burning. 3.In welding, do not rub the soldering tip with too much pressure to friction the solder, which will damage the iron head.
- Page 14 More FAQ please follow this link:http://www.quickochina.com/FAQ/ FAQ： 1. Why the temperature of the new T12 solder tip is jump? Because the inside heating core of the new T12 solder tip did not go through the high temperature, so the first time to use will be a bit of temperature, generally without special treatment, the normal use of 1-2 days after the basic will not bounce.
- Page 15 Your feedback will make us better! Chinese website Taobao Aliexpress Made in China Quicko electronic co TEL:08615992468682...