Sony DAV-FX100W Marketing Operating Instructions Manual page 23

4
Attach the wall-mount pads on the rear side of the speaker.
5
Hang the speakers on the screws.
Note
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.
• Contact a screw shop or installer regarding the wall material or screws to be used.
• Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
Wall-mount pads
(7 × 7 mm, 3 mm thick)
9 9 1
( / × / inch, /
32 32 8
Hole on the back of
4.6 mm
the speaker
3
( / inch)
16
10 mm
13
( / inch)
32
inch thick)
23
US