First time Auto
Tuning
When the TV is turned on for the first time, it will
automatically search for available TV channels and give
options to set up the TV.
●
These steps are not necessary if the setup has been
completed by your local dealer.
●
Please complete connections (p. 10 - 14) and
settings (if necessary) of the connected equipment
before starting Auto Tuning. For information about
the settings for the connected equipment, read the
manual of the equipment.
1
Plug the TV into a live mains socket
and turn the power on
●
Takes a few seconds to be displayed.
2
Select the following items
Set up each item by following the on-screen instructions.
■
How to use remote control
Move the cursor
Access the item / store the setting
Return to the previous item (if available)
Select your viewing environment
Connect to the Internet
Set up the network connection
Select your State/Territory
3
Tuner Mode
New Zealand
Tuner Mode
Antenna
Satellite
Australia
[Satellite]
Satellite Type
Please select satellite type.
Freeview
All Satellites
●
Freeview > Operator type > Region > Antenna type
> Satellite
●
All Satellites > Antenna type > Satellite
[Antenna] [Satellite]
Automatic channel search
First, please connect antenna.
Start channel scan now ?
If you skip this step, the channel scan could be performed in Menu
Skip Scan
select
confirm
●
To return to the previous screen / field
●
To exit Channel Scan
●
If some channels are not tuned correctly, you can try
to tune them by [Channel Scan] in [Tuning Menu] (TV
Menu).
●
If Satellite were selected, please configure type of
scan info
New Zealand
Congratulations !!
Completed Initial Setup.
Please press [ENTER] to exit the wizard.
If tuning has failed check the RF cable, and the network
connection, and then follow the on-screen instructions.
Scan
English
17