Blue Guard BG-SPKit-A Quick Start Manual

Sump pump kit

BG-SPKit-A / BG-SPKit-B

Sump Pump Kit

Q U I C K S T A R T G U I D E

Overview

The BG-SPkit (Solid-State Sump Pump Switch with AC Switch and AC Power Supply) is a highly reliable sump pump switch,

with no moving parts, that is the ideal replacement for unreliable mechanical float switches. The BG-SPKit includes all the

necessary equipment to integrate the BG-SP (Solid-State Sump Pump Switch) into the sump pump operator's current sump

pump system. The BG-SP uses two integrated sensors to detect liquid in the sump while reliably activating the sump pump.

Having no moving parts that can be jammed or damaged, the solid-state IP-68 rated BG-SP is built to outlast all mechanical or

solid-state float switches on the market today.

BG-SPKit |

QU I CK S TART G U I D E

Water Activation Level

REV A

www.bluebgi.com

Table of Contents

Do you have a question about the BG-SPKit-A and is the answer not in the manual?

Page 1 Having no moving parts that can be jammed or damaged, the solid-state IP-68 rated BG-SP is built to outlast all mechanical or solid-state float switches on the market today. Installation Overview A (BG-SPKit-A with Pump Mount) Water Activation Level BG-SPKit | www.bluebgi.com...
Page 2: Installation Instructions
Installation Overview B (BG-SPKit-B with Pipe Mount) Water Activation Level Installation Instructions 1) Drain the sump area (Recommended). 2a) Attach the sensor mounting bracket to the pump or 2b) Attach the pipe mounting bracket to the sump pipe. next to the top of the pump. Then attach the BG-SP Then attach the BG-SP sensor to the bracket.
Page 3 3a) Secure all three BG-SP sensor wires along the AC 3b) Secure all three BG-SP sensor wires along the AC power cable sump pump cord using the straps provided. power cable sump pump cord using the straps provided. 4) Plug the pump power plug into the AC PowerSwitch. 5) Connect the red wire to the right side positive (+) of the AC/DC Power Supply DC source.
Page 4 The exclusive remedy of the consumer purchaser in the event the product is defective is to return the product to Blue Guard Innovations, LLC at the above address, freight prepaid with original sales receipt. IMPORTANT: FOR THIS WARRANTY TO BE EFFECTIVE, the product MUST BE SUPPLIED WITH PROOF OF ORIGINAL PURCHASE DATE OF THE PRODUCT.

Bg-spkit-b