Tuner; Presetting Radio Stations - Sony CMT-HP7 Operating Instructions Manual

Tuner

Presetting radio stations

You can preset up to 20 FM stations and 10 AM
stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
Automatic tuning preset
You can automatically tune in all of the stations
that can be received in your area and then store
the radio frequency of the desired stations.
1
Press TUNER BAND repeatedly to
select "FM" or "AM".
2
Press and hold TUNING +/– until the
frequency indication starts to change,
then release it.
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
"TUNED" and "STEREO" (for an FM
stereo program) appear.
If "TUNED" does not appear and the
scanning does not stop
Set the frequency of the desired radio
station as described in steps 2 through 6 of
"Manual tuning preset" (page 13).
3
Press TUNER MEMORY on the remote.
A preset number appears.
4
Press PRESET +/– repeatedly to select
the desired preset number.
5
Press ENTER on the remote.
6
Manual tuning preset
You can manually tune in and store the radio
frequency of the desired stations.
1
2
3
4
5
6
Other Operations
To
Tune in a station
with a weak signal
Set another station
to the existing
preset number
Preset number
Repeat steps 1 through 5 to store other
stations.
Press TUNER BAND repeatedly to
select "FM" or "AM".
Press TUNING +/– repeatedly to tune in
the desired station.
Press TUNER MEMORY on the remote.
A preset number appears.
Press PRESET +/– repeatedly to select
the desired preset number.
Press ENTER on the remote.
Repeat steps 1 through 5 to store other
stations.
Do this
Follow the procedure described
in "Manual tuning preset"
(page 13).
Start over from step 1. After
step 3, press PRESET +/–
repeatedly to select the preset
number you want to store the
other station.
continued
GB
13