Sony CMT-ED1/ED1A Operating Instructions Manual page 6

Step 1: Hooking up the system
(continued)
To remove the AM aerial
If noise is heard while listening to an AM
station, remove the AM aerial from the rear
panel and place the aerial outside the cabinet.
1 Remove the rear cover.
(See step 1 on the page 4.)
2 Remove the AM aerial.
3 Attach the rear cover.
(See step 3 on the page 5.)
You can hang the AM aerial on a wall.
If noise is heard while listening to an FM
station, remove the FM aerial from the rear
panel and place the aerial outside the
cabinet.
To exchange the speaker net
You can remove the speaker net drawing up
to your side and exchange with the supplied
extra net.
Tip
See wire dressing for the rear panel prior to install
the rear cover.
6
Hook
Inserting two AA (R6) batteries
into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
]
}
}
]