Kengo PUSXBS Installation Instruction

Product:
PLEASE READ THESE BEFORE COMMENCING INSTALLATION AND
PUSXBS
RETAIN FOR FUTURE REFERENCE.
PUSXBS-2C
PUSXBS-2U
If the external flexible cable or cord of this socket is damage, it shall
PUSXBS-2C2U
be exclusively replaced by the manufacturer or his service agent or similar
PUSXBS-BA2C
qualified person in order to avoid a hazard.
PUSXBS-BA2U
This is a Class I product. Must earth.
X=no.of socket - Max.3
PUS1BS-BA2C2U
If in doubt regarding these installations, consult a qualified electrician.
DUSXBS
CAUTION: Risk of Electric Shock - For indoor use only
DUSXBS-2C
DUSXBS-2U
DUSXBS-2C2U
DUSXBS-BA2C
DUSXBS-BA2U
X=no.of socket - Max.3
DUS1BS-BA2C2U
Specification
230-250V~50Hz
Output Voltage : 5V DC
Max. 3250W 13A
Output Current : Max. 2100mA
Individual switch for power on / off

Pack Contents:

LED indicator function when power on
Pop-up socket x 1
CAUTION : It is not applicable for the digital products with internal
protection or the ones requiring driving programme
Fixing pack x 1
Instruction leaflet x 1
IP54
RJ45 8-connector, category 5 standard
Contacts are phosphor bronze plated with hard gold.
Superior performance and low loss signal transmission.
For cable extension use only, please make sure the extend cable is
connected to suitable data socket before use.
According to Waste of Electrical and Electronic Equipment (WEEE) directive, WEEE should be separately collected and treated. If at any
time in future you need to dispose of this product please do not dispose of this product with household waste. Please send this product to
WEEE collecting points where available. Do not dispose this product as unsorted municipal waste. Collection of such waste separately for
Luen Yick Electrical Mfg. Co., Ltd.
Flat F, 10/F., Block 2, Kingsford Ind. Building 26-32 Kwai Hei Street, Kwai Chung, N.T. Hong Kong
Pop-up Socket
Installation INSTRUCTION

USB CHARGER SPECIFICATION

RJ45 DATA SOCKET SPECIFICATION

MINIATURE AUDIO SPEAKER SPECIFICATION

Output Power : Max. 2W
Audio
Sensitivity : L/R 380MV
connector
SNR : >80db
Volume &
ON/OFF
Speaker Frequency Range : 280Hz-16KHz
Audio Connector : Standard 3.5mm headphone connector
- Suitable for all music player, include MP3, MP4, Smartphones, iPhone 5, iPad, Android Phones.
How to Connect to Bluetooth
- Switch on the power, you will see the bluetooth signal indicator start flashing.
- Open your mobile device and turn on the bluetooth function, connect the device named "Kengo" or
"Kengo0001" (note: if the name showing Kengo0001 it means the number digit would be different.)
- Then press connect to the device, if the connection ok, then you will hear a "bip" sound and the
bluetooth signal indicator flashing a different frequency.
- Onced connected, you can start play the music now.

MAINTENANCE

Ensure that to disconnect the power prior to cleaning.
To keep the finish of this product, wipe over with soft cloth periodically.
Clean the socket with a damp cloth and mild detergent, dry immediately.
Do not use harsh chemical solvents, it may dis-color or damage the finish.
Never force to life up or push down – always check that there are no obstructions that could
interfere during retraction.
Bluetooth
Signal
Bluetooth
Indicator
Power
Indicator
ILL500A