Advertisement
Quick Links
bt-accent
1. Read operation manual prior to using the equipment.
2. Do not use the unit if any contraindications are present.
4. Attach Handpiece tube into
JET connection on top of unit
and place Handpiece in holster.
5. Attach AIRbrush tube into
WAND connection on top of
unit and place in holster.
Skin Care for life inside and out
AIR quick start guide
®
®
3. Attach accessory holster to
back of unit. Secure with
four screws and allen wrench
provided.
6. Attach Dome Tube onto Dome
Tube Connector located on
front of machine above Flow
Meter.
Advertisement
Related Manuals for Bio-Therapeutic bt-accent AIR
Summary of Contents for Bio-Therapeutic bt-accent AIR
- Page 1 Skin Care for life inside and out ® bt-accent AIR quick start guide ® 1. Read operation manual prior to using the equipment. 2. Do not use the unit if any contraindications are present. 3. Attach accessory holster to back of unit. Secure with four screws and allen wrench provided.
- Page 2 7. Attach the other end of Dome Tube to Dome. 8. Attach POWER CORD unit, plug into standard wall outlet appropriate for the unit. Press POWER SWITCH at rear of unit to “On”. To wall 9. Press Power button at top of unit near handle.
- Page 3 11. Adjust flow meter to desired level. 12. AIRbrush Fill cup half full with RESTYFLUID, or other appropriate bt-ceuticals ® product. 13. Select WAND Press trigger to start spray. When empty, allow AIR to flow through AIRbrush for one minute. Follow cleaning instructions found in the Operation Manual.
- Page 4 15. Select JET. 16. Turn off by pressing selected accessory button again. Press power switch at the rear of the unit to “Off.” bio-therapeutic.com SA-910 REV062718...
Need help?
Do you have a question about the bt-accent AIR and is the answer not in the manual?
Questions and answers