Subscribe to Our Youtube Channel
Summary of Contents for Siefken SPP20ULTRA
- Page 1 User´s manual BATTERY CHARGER SPP20ULTRA Operating Instructions Please read the operation instructions meticulously and pay particular attention to the safety instructions.
- Page 2 BRUSHLESS TECH series Care for the environment! Must not be discarded with household waste! This product contains electrical or electronic components that should be recycled. Leave the product for recycling at the designated station e.g. the local authority's recycling station.
- Page 3 BRUSHLESS TECH series BA TTERY CHARGER CONTENT ENGLISH............... .17 SAFETY INSTRUCTIONS.
-
Page 4: Safety Instructions
BRUSHLESS TECH series BA TTERY CHARGER SAFETY INSTRUCTIONS Read the operating instructions carefully before use. Save them for future reference. • The battery charger is only intended for use indoors in dry, well ventilated areas. • Never try to charge non-rechargeable batteries. •... - Page 5 BRUSHLESS TECH series BA TTERY CHARGER Input voltage____________________________________ 230–240 V, 50–60 Hz Output________________________________________ 40 W Output voltage ___________________________________14.4–18 VDC Output current ___________________________________1.5 A Safety class _____________________________________II Protection rating__________________________________ IPX0 Battery type _____________________________________Lithium Cells (number and voltage) ____________________________4 x 3.6 VDC Battery capacity ___________________________________1.3 Ah...
- Page 6 BRUSHLESS TECH series BA TTERY CHARGER BATTERY NOTE: • Make sure that the power switch on the tool is not pressed in when inserting or replacing the battery. • Do not force the battery when connecting it, use a moderate pressure. An incorrectly connected battery can damage the battery terminals or the battery socket on the tool.
- Page 7 BRUSHLESS TECH series BA TTERY CHARGER Charging the battery NOTE: • The battery must be charged before it can be used with a tool. • After charging for the rst time, use the tool until the battery is completely discharged. Repeat this charging and discharging cycle 4 to 5 times.
-
Page 8: Year Warranty
TOTAL SATISFACTION If the siefken tool do not satisfies the need in work, during the 30 days after your purchase you will be able to change your power tool with on of the same reference but with more capacity just by paying the difference.
Need help?
Do you have a question about the SPP20ULTRA and is the answer not in the manual?
Questions and answers