Test Drive - Abilitec Amber Getting Started

Before embarking on this test drive, it is important to have charged Amber's battery. See the
section "Before You Begin" in this manual.
In order to program Amber, it is necessary to have an understanding of how Amber works.
Make sure you have already read the sections "What Can Amber Do?" and "How Does
Amber Work?" in this manual.
You will need to find yourself a quiet place in which to work, where you won't be interrupted
for thirty minutes or so, and where there is a minimum of background noise. You will need a
flat stable surface on which to work. Please make sure you have the following items at hand:
• This manual "Getting Started"
• Amber
• Microphone
• A remote control (we will assume that you are using one for a television)
• The appliance (television) to go with the remote control
Switch Amber On
1. Switch the Battery switch to On and wait for at least 5 minutes.
2. Switch the Battery switch to Off.
3. Press and hold Speech Recording Control 4 (located on the rear
panel)
4. Switch the Battery switch to On
5. Release Speech Recording Control 4
The orange BUSY light will come on for about 20 seconds while Amber clears its memories.
A beep will be heard when this is done. Amber is now ready for you to begin
recording.

Test Drive