FINO FINOCAM A5 User Information page 99

16.2.2 Removing a tool type from the stock
The tool type not assigned to any tool magazine. Otherwise remove it from all
magazines.
S 1. In the desired tool card click on the depicted icon.
S 2. Confirm the security prompt.
FINOCNC replaces the affected tool card with an empty tool card.
16.2.3 Organizing the tool stock with the Administrated Tool Board
For organizing the tools outside the tool changer of the CNC machine, we recommend
the Administrated Tool Board (ATB). It offers 30 slots which correspond to the 30 tool
cards of the stock list in FINOCNC.
If you keep the tools in the ATB and in the stock list identical, all information about
the tool life, geometry etc. remain linked to the corresponding tools, and you have
a much greater selection of tools at your disposal. If you are interested in the ATB,
contact your reseller.
Illustration 44: The Administrated Tool Board With 30 tool positions
Illustration 45: The tools in the ATB correspond to the tool stock list in FINOCNC
ENU
61