Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for BLASTONE 4000-01
- Page 1 INSTALLATION, OPERATION AND MAINTENANCE MANUAL CLIMATE CONTROL DEVICE 4000-01...
- Page 2 TYPE CE, CONTINUOUS FLOW, SUPPLIED-AIR RESPIRATOR THESE RESPIRATORS ARE APPROVED ONLY IN THE FOLLOWING CONFIGURATIONS RESPIRATOR COMPONENTS Alternate Breat- Alternate Flow Alternate Alternate Quick Alternate Alternate Cautions and hing Alternate Lenses Helmets Regulator Capes Disconect Hoses Visor Limitations 2 Tube and Belt Protection TC No.
-
Page 3: Air Quality
INTRODUCTION The 4000-01 Cold Air Tube is NIOSH approved to supply a continuous flow of cool compressed air to the Supplied Air Respirator. All Genuine Parts must be present and correctly assembled to constitute a NIOSH approved respirator. AIR QUALITY The respirator must be supplied at all times with clean breathable air Grade D or better. -
Page 4: Setup And Use
(Fig 4). Turn the knob clockwise to obtain air closer to ambient temperature. WARNING Fig 4 DO NOT USE THE 4000-01 when ambient temperature is below 68¡ (20¡C) as ice could form in the cold air outlet and reduce airflow. - Page 5 CCT 4000 PARTS LIST Item PART No. Top Threaded Cap 4000-03 Air Spinner 4000-04 Body 4000-05 1/4'' Quick Disconnect Tail 4000-06 Breaker 4000-07 Regulator Body 4000-08 Spindle & Knob 4000-09 Locking Screw 4000-10 Regulator Assembly 4000-11 Heat Sheild 4000-12 Belt NV2022 WARNING Due to the high noise levels created during abrasive blasting earplugs must be worn at all...
- Page 6 NOTES...
- Page 7 NOTES...
-
Page 8: Other Products
DID YOU KNOW OTHER PRODUCTS We can also supply you with the following... NOVA 2000 BLASTING HELMET The NOVA 2000 has been designed for blasting professionals. The NOVA 2000 is the most advanced abrasive blasting helmet available, with fully padded pillow foam liner for extra comfort and noise attenuation, wide angle vision, even air distribution assures a pleasant working environment, optional climate control devices. - Page 9 BLASTONE INTERNATIONAL (AUST) PTY LTD BLASTONE INTERNATIONAL 57 Alexandra Place Murarrie 4510 Bridgeway Avenue Queensland 4172 Australia Columbus Ohio 43219 USA Toll Free 800 999 1881 PO Box 3385 Tingalpa DC Tel (614) 476 3000 Queensland 4172 Australia Fax (614) 476 3002 Email sales@blastone.com...
Need help?
Do you have a question about the 4000-01 and is the answer not in the manual?
Questions and answers