Acorn Safety S0310-FPB Installation, Operation And Maintenance Instructions

Pedestal eye/facewash

Advertisement

Quick Links

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS
TECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER

NOTES TO THE INSTALLER:

1. Please leave this documentation with the owner of the fixture when finished.
2. Please read this entire booklet before beginning the installation.
3. Check your installation for compliance with plumbing, electrical, ANSI Z358.1 and
other applicable codes.
Acorn Safety warrants that its products are free from defects in material or workmanship under normal use and
service for a period of one year from date of shipment or 18 months after the date of shipment from factory ,
whichever comes first. Acorn's liability under this warranty shall be discharged solely by replacement of repair of
defective material, provided Acorn is notified in writing within one year from date of shipment, F.O.B. Industry,
California.
This warranty does not cover installation or labor charges and does not apply to materials, which have been
damaged by other causes such as mishandling or improper care or abnormal use. The repair or replacement of the
defective materials shall constitute the sole remedy of the Buyer and the sole remedy of Acorn under this warranty.
Acorn shall not be liable under any circumstances for incidental, consequential or direct charges caused by defects in
materials, or any delay in the repair or replacement thereof. This warranty is in lieu of all other warranties expressed
or implied. Product maintenance instructions are issued with each unit and disregard or non-compliance with these
instructions will constitute an abnormal use condition and void the warranty. Stainless steel must be protected on job
sites during construction and must be properly maintained after the water has been introduced into the safety product
or Acorn's warranty is void.
Acorn Safety
a division of Acorn Engineering Company™
Manual #7109-214-001
PEDESTAL EYE/FACEWASH
MODELS S0310-FPB/S0320-FPB/S0330-FPB/S0340-FPB
1.800.591.9360
TECHNICAL ASSISTANCE FAX: 1.626.855.4894

LIMITED WARRANTY

UNITED STATES AND CANADA
ACORN SAFETY
P.O. BOX 3527
CITY OF INDUSTRY, CA 91744-0527
UNITED STATES OF AMERICA
WWW.ACORNSAFETY.COM
Date: 10/28/2013

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S0310-FPB and is the answer not in the manual?

Questions and answers

Summary of Contents for Acorn Safety S0310-FPB

  • Page 1 UNITED STATES AND CANADA Acorn Safety warrants that its products are free from defects in material or workmanship under normal use and service for a period of one year from date of shipment or 18 months after the date of shipment from factory , whichever comes first.
  • Page 2 2. Separate parts from packaging and verify all necessary parts are accounted for and undamaged. Obtain missing or damaged parts from Acorn Safety prior to beginning installation. 3. Flush water supply lines prior to installation. This will remove unwanted debris from the lines and prevent unwanted blockages in the safety equipment.
  • Page 3 1. Connect hydrant (B) to eyewash (A) assembly using 5/8" OD x 3/8" NPTE compression adapter provided & proper plumbing techniques to seal all made up threads. Acorn Safety a division of Acorn Engineering Company™ Manual #7109-214-001 Page 3 of 7...
  • Page 4 1-1/4" NPT [800] WASTE 8" BACK FILL [203] AREA FROST LINE POROUS GRAVEL FILL (MIN. 3 CU FT. WEEP BY OTHERS) HOLES VALVE BODY Acorn Safety a division of Acorn Engineering Company™ Manual #7109-214-001 Page 4 of 7 Date: 10/28/2013...
  • Page 5 If the ball valve does not operate smoothly check the actuating assembly for binding or missing parts. If the Acorn Safety a division of Acorn Engineering Company™ Manual #7109-214-001 Page 5 of 7...
  • Page 6 INSPECTION TAG FPB EYE/FACE WASH 7107-142-001 ASSEMBLY 1-1/4” NPTE x 18-3/8” 7100-180-022 LONG GAL PIPE HYDRANT ASSEMBLY, 7107-162-001 ¾” NPT, 36” FPB 7100-401-000 EYEWASH SIGNAGE Acorn Safety a division of Acorn Engineering Company™ Manual #7109-214-001 Page 6 of 7 Date: 10/28/2013...
  • Page 7 INSPECTION TAG FPB EYE/FACE WASH 7107-142-001 ASSEMBLY 1-1/4” NPTE x 18-3/8” 7100-180-022 LONG GAL PIPE HYDRANT ASSEMBLY, 7107-162-001 ¾” NPT FPB 7100-401-000 EYEWASH SIGNAGE Acorn Safety a division of Acorn Engineering Company™ Manual #7109-214-001 Page 7 of 7 Date: 10/28/2013...

This manual is also suitable for:

S0320-fpbS0340-fpbS0330-fpb

Table of Contents