Connective Peripherals ES-U-1001-R10 Datasheet

Premier Gold USB-RS232 Adapter
The USB-RS232 adaptor cables are a family of communication devices from Connective Peripherals
Pte Ltd. This model, ES-U-1001, provides a simple method of adapting legacy serial devices with
RS232 interfaces to modern USB ports by incorporating the FTDI FT232R bridge chip.
This cable is available in two lengths 10cm (ES-U-1001-R10) and 100cm (ES-U-1001-
R100). Indicator LEDs provide status of Transmit (TXD) and Receive (RXD)
E-Mail (Support): support@connectiveperipherals.com
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced
in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are
supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Connective
Peripherals Pte Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your statutory
rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in which the
failure of the product might reasonably be expected to result in personal injury. This document provides preliminary information that
may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the publication of
this document. Connective Peripherals Pte Ltd, 178 Paya Lebar Road, #07-03 Singapore 409030. Registered Number: 201617872E
ES-U-1001-R10 (R100)
Data Sheet
Document Reference No.: CP_000057
Issue Date: 2019-03-28
Connective Peripherals Pte Ltd
178 Paya Lebar Road, #07-03 Singapore 409030
Tel.: +65 67430980
Copyright © Connective Peripherals Pte Ltd
Version 1.1
Fax: +65 68416071
Web: www.connectiveperipherals.com/products
cable