Centric Air RT2 User& Installer's Manual

Wireless whole house fan control

Advertisement

The RT2 is a wireless whole house fan (WHF)
control that can be placed on a bedroom table or
used anywhere in the home to control the Whole
House Fan using temperature for improved comfort
and energy efficiency or a built-in 1 to 12-hour
timer. The fan speed can be set from the remote.
The RT2 has a wireless range of 125 feet in a
home or building.
QUICK START FOR HOMEOWNERS
Before operating your Whole House Fan (WHF), always OPEN windows. See the WHF Owners manual for
more information. Your A/C should be off during WHF operation.
In the morning and/or before operating your A/C, make sure the RT2 control is set to Econo Cooling OFF.
If operating your A/C, make sure windows are closed.
Operating your WHF using Temperature Control (See pages 2 and 3 for more information).
The RT2 wireless WHF control is factory set to control your WHF using Temperature, just like your thermostat, and
improves your comfort and energy savings. Simply touch the Econo Cooling key to display ON, then set the Set To
temperature to your desired Indoor temperature. The WHF will turn ON if the Indoor temperature is 1 above the Set
To temperature and turn OFF when the Indoor temperature drops 1 below the Set To temperature. The following
morning or when WHF operation is no longer desired, touch the Econo Cooling key to display OFF. As a precaution,
the RT2 control includes a built-in Safety Timer that will turn the WHF OFF after 8 hours of operation.
Operating your WHF using Timer Control (See pages 2 and 4 for selecting Timer Operation)
In Timer Control, touch the
displayed on the RT2. The factory default is 3 hours but can be adjusted (see page 4).
Displays the outdoor
temperature when an outdoor
temperature sensor is installed.
Displays the WHF speed.
Indicates the RT2 is linked to
the RM2 receiving module.
MENU Key accesses
user options such as
Temperature or Timer Control.
Econo Cooling key to display ON. The WHF will now operate for the length of time
Outdoors
Link
Menu
User & Installer Manual
Wireless Whole House Fan Control
Outdoors
Cool
Link
ed
Set To
Menu
o
Indoors
o
F
Cool
ed
Set To
Econo
Cooling
ON
Model RT2
Indoors
o
F
Model RM2
Econo
WHF Radio
Cooling
Module
ON
RSM, CA
o
Displays the indoor temperature.
Use the Up/Down keys to change
Set To Temperature setting or timer
setting in WHF cooling.
Displays the Set To Temperature
setting for WHF cooling.
Use this key to turn WHF cooling
On or Off.
Slide battery cover off to replace
the two AA batteries.
Rev Nov 2018
Pat. Pending
Made in USA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RT2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Centric Air RT2

  • Page 1 Before operating your Whole House Fan (WHF), always OPEN windows. See the WHF Owners manual for more information. Your A/C should be off during WHF operation. In the morning and/or before operating your A/C, make sure the RT2 control is set to Econo Cooling OFF. If operating your A/C, make sure windows are closed.
  • Page 2 Owners manual for more information. Your A/C should be off during WHF operation. In the morning and/or before operating your A/C, make sure the RT2 control is set to Econo Cooling OFF. If operating your A/C, make sure windows are closed.
  • Page 3 Owners manual for more information. Your A/C should be off during WHF operation. In the morning and/or before operating your A/C, make sure the RT2 control is set to Econo Cooling OFF. If operating your A/C, make sure windows are closed.
  • Page 4 Owners manual for more information. Your A/C should be off during WHF operation. In the morning and/or before operating your A/C, make sure the RT2 control is set to Econo Cooling OFF. If operating your A/C, make sure windows are closed.
  • Page 5: Installation

    HOMEOWNER - WHF OPERATION Change the Fan Speed For single speed WHFs, the fan speed will be displayed as Hi and cannot be adjusted. For 2, 3 or variable speed WHFs, the speed can be adjusted by pressing the Fan Speed and using the UP and DOWN Keys. Changing 2 or 3-Speed WHFs Changing Variable Speed WHFs Outdoors...
  • Page 6: Wireless Communication

    Centric Air RSM, CA / CentricAir.com Contains Transmitter Module FCC ID: The ID Number on the RT2 should always match the ID OA3MRF89XAM9A This device complies with Part 15 of the FCC Number on the RM2 - see below.
  • Page 7: Installer Options

    Power the WHF and Set Installer Options The optional TS4 Outdoor Temperature Sensor should Be sure to set the Fan Type and Fan Speed in the RT2 be installed under the eaves of the home and out of before powering the WHF. See Installer Options below.
  • Page 8 INSTALLER OPTIONS 02 Set the FAN SPEEDS 03 High Speed Start Up PSC Fans Select 1 or 2-speed For some installations, a low speed start up may not be adequate to fully open the damper. When this option is set to ON, the WHF will start up in high speed and after about 10 seconds will return to the low speed setting.

Table of Contents