Sony STR-DA90ESG Operating Instructions Manual page 36

Sound Adjustment
Adjusting the delay time
Click SETUP in the main menu, then click DELAY.
CENTER
p
p REAR
RETURN
Click the buttons next to each setting to adjust the
delay time as you desire.
CENTER
Use this adjustment to add a sense of depth to the center
channel. Longer delay times create a greater sense of depth.
The CENTER delay can be set from 0 to 5 ms (in 1 ms steps).
REAR
Use this adjustment to add a sense of depth to the rear
channel. Longer delay times create a greater sense of depth.
The REAR delay can be set from 0 to 20 ms (in 5 ms steps).
Adjusting surround sound parameters
(except for delay time)
Adjust the surround sound parameters to fit your
listening situation. See the chart "Adjustable sound
parameters" on page 34 for parameters you can adjust
in each sound field.
1
While playing a component, click SOUND in the
main menu to display the SOUND FIELD
SELECT menu.
2
Click a sound field genre, then click MODE
repeatedly until the mode you want appears.
3
Click SUR.
MODE
SOUND FIELD
BASS BOOST
DIRECT PASS
EQ
36
DELAY SETTING
– +
0 ms
–
+
5 ms
EXIT
THEATER
O N OFF
O N OFF
O N OFF
SUR EXIT
4
Click the icon for the parameter you want to
adjust.
The parameter chart for your selection appears.
See the next page for details of each adjustment.
SURROUND EDIT
CENTER : +10 dB
WOOFER : +10 dB
REAR : +10 dB
[ – – – – – – + – – – – – –
RETURN STANDARD
5
Click an adjustment icon (+ / – , UP/DOWN,
SHORT, LONG, etc.,) to adjust the parameter.
SURROUND EDIT
TYPE : SOFT1
FRONT
RETURN STANDARD
To reset all parameters (except for the delay time) of the
current sound field to the factory settings.
Click STANDARD.
+
LEVEL
–
EFFECT
WALL
SEAT
+
REVERB
–
OTHER
TEST
+
REAR
–
BALANCE
B b
]
EXIT
LEVEL
EFFECT
WALL
SEAT
REVERB
OTHER
TEST
HARD
SOFT
EXIT