Page 1
MMA-A User’ s Manual Digital Audio Interface...
Page 2
Getting started quality dual-channel microphone preamplifier Connect your DPA microphone(s) to the MicroDot input(s) on the MMA-A, denoted I and II. and A/D converter. It allows you to capture (If only one mic is connected to either input, the signal will be interpreted as MONO and crystal-clear audio via your favorite recording automatically sent to both output left and right.)
Page 3
The MMA-A can be used right out of the box but to take full advantage of it, please refer to these Download the App instructions to get started using the MMA-A App. Download and install the MMA-A App from the Apple App Store.
Use STEREO when you need to capture Use SUM to make a mix of the two input The black surface of the MMA-A is fairly scratch resistant, but is sensitive to detergents. Avoid using sound sources in stereo. Both microphones channels.
If you are not satisfied with the characteristics exhibited by this product, please go to dpamicrophones.com/service for instructions. Warranty The MMA-A Digital Audio Interface is covered by a two-year limited warranty. CE marking This product conforms to all relevant directives approved by the European Commission.