Email Response Codes; Response Code Descriptions - Assa Abloy TRAKA32 User Manual

3.18.5

EMAIL RESPONSE CODES

When using Email Notification there are various response codes sent and received between Traka32 and the customer
email server. For example, before an email is sent Traka32 will send a code to the customer email server to ensure
that there is a reliable connection. Once received the email server will send a code back to Traka32 confirming that the
connection is made and communications are clear.
Some customer email servers send the wrong codes for certain messages, the data has been sent and received
correctly however the code that the email server has sent is incorrect. It is possible to change the response codes that
are expected back from the customers email server. Below is list of the SMTP codes that are sent to the email server
and their default response codes:

Response Code Descriptions

220 - SMTP Service ready.
221 - Service closing.
250 - Requested action taken and completed.
354 - Start message input and end with <CRLF>.<CRLF>. This indicates that the server is ready to accept the
message itself.
The following section will need to be added into the T32Settings.ini file, in the example below are all the response
codes with their default values. On a customer site you only need to add in the lines that you want different from the
default codes.
V3.5 14/08/19 UD0089 Page 414
This Document is uncontrolled unless over stamped "CONTROLLED DOCUMENT"