LG LTNH182QLE0 Owner's Manual page 19

Delay Start/Pre-Set Stop
1. Make sure the time is set correctly on the Remote Controller display.
2. Press 2 nd F button.
3. Press the ON/OFF Timer buttons to turn Timer on or off.
4. Press the Time Setting buttons until the desired time is set.
5. Press the selected on/off setting by pressing the Timer SET button while aiming the Remote Controller
at the signal receptor.
To cancel the setting the timer.
CANCEL
Press the Timer Cancel button while aiming Remote Controller at the signal receptor.
(The timer lamp on the air conditioner and the display will go out.)
SET
Delay off timer
Vertical Airflow Direction Control (Optional)
The up/down airflow (Vertical Airflow) can be adjusted by using the remote controller.
1. Press the Start/Stop button to start the unit.
2. Press Chaos Swing button and the louvers will swing up and down.
Press the Chaos Swing button again to set the vertical louver at the desired airflow direction.
NOTICE
❏ If you press the CHAOS swing button, the horizontal airflow direction is changed automatically based on the
CHAOS algorithm to distribute the air in the room evenly and at the same time to make the human body feel
more comfortable, as if enjoying a natural breeze.
❏ Always use the remote controller to adjust the up/down airflow direction. Manually moving the vertical airflow
direction louver by hand, could damage the air conditioner.
❏ When the unit is shut off, the up/down airflow direction louver will close the air outlet vent of the system.
Horizontal Airflow Direction Control (Optional)
The left/right(Horizontal Airflow) can be adjusted by using the remote control.
Press the Start/Stop button to start the unit.
Open the door on the remote control. Press the Airflow Direction Start/Stop button and the
louvers will swing left and right. Press the Horizontal Airflow Direction Control Button again to
set the horizontal louver at the desired airflow direction.
Delay on timer Delay off and on timer
ON OFF
Owner's Manual 19
Additional features
CANCEL
SET
Delay on and off timer