Page 12
• o o • ° • Chemical Feed Hose Connect the Auto-Fill Water Supply Hose to a faucet and turn on the water ...
Page 13
HP Solution Hose Assembly – AH79D 1/4” id X 25’ with M-F Quick Connects Connect the male end of the HP Solution Hose Assembly to the female solution outlet fitting on ...
Page 15
• • • • Connect the Female Garden Hose Fitting end of the Pump-out Hose to the outlet fitting ...
Page 16
• • • o o o o To increase the solution pressure, turn the To decrease the solution pressure, turn the regulator/unloader knob clockwise. regulator/unloader knob counter-clockwise. ...
Page 19
Troubleshooting – Nautilus MX3-500RP Problem Cause Solution Machine not Building circuit breaker tripped. Reset breakers or move cords to other outlets turning on - Faulty power cord Replace cord (1696-6412) No power Faulty switches or internal wiring Check wiring &...
Page 20
Problem Cause Solution Dual Circuit Cords on the same circuit Move one cord to outlet on different circuit Indicator No voltage from one/ both outlets Check circuit breakers – Reset breakers or move cords Not Lighted Light Bad Replace Light Dual Circuit Indicator Bad Replace indicator If hot &...
Page 21
Problem Cause Solution Tool won't Jets clogged Clean out or replace jets spray - low or Inline filter clogged Clean out or replace filter uneven spray Jets worn Replace jets Jets not aligned properly Re-align jets Tool valve faulty Repair or replace valve Quick connects or hoses restricted Clean out or replace quick connects and/or hoses...
Need help?
Do you have a question about the Nautilus MX3-500RP and is the answer not in the manual?
Questions and answers