Page 3
• Do no use PFU 210e in areas where there is danger current conditions. of explosion. • Immediately replace the filter(s) as soon as you can •...
Blower status: maximum and minimum power. 4. Operation 4.1 Assembling PFU 210e 4.3 Air flow test 1. Fit the filters and the filter cover properly to the Perform the air flow test before every use.
1. To remove the cover, press the opening button. 1. Remove the battery from the blower unit. 2. Check which filters need replacing. Sometimes 2. Connect the Kemppi Charger to a power supply replacing the prefilter is enough. and to the battery. Charging time (80%): ca.
ENGLISH 9. Technical data Model PFU 210e Manufacturer Kemppi Oy, PL 13, 15801 Lahti, Finland Compliance with standards PFU 210e: EN 12941 • With Gamma GTH3: TH3 class • With Beta FA: TH2 class PFU 210e: AS/NZS 1716 • With Gamma GTH3: P2 class •...
Page 7
The owner of the equipment is obliged to deliver a decommissioned unit to a regional collection centre, as per the instructions of local authorities or a Kemppi representative. By applying these European Directives you improve the environment and human health.
Page 8
Declarations of Conformity – Overensstemmelseserklæringer –Konformitäts-erklärungen – Declaraciones de conformidad – Vaatimustenmukaisuusvakuutuksia – Déclarations de conformité – Dichiarazioni di conformità – Verklaringen van overeenstemming – Samsvarserklæringer – Deklaracje zgodności – Declarações de conformidade – Заявления о соответствии – Försäkran om överensstämmelse – 符合性声明 userdoc.kemppi.com...
Need help?
Do you have a question about the PFU 210e and is the answer not in the manual?
Questions and answers