Advertisement
Quick Links
Package Contents
A. Pro-Fill Valves (6)
B. Flexible Manifolds (2)
C. Quick Connect Coupler (1)
D. Dust Cap (1)
E. Red End Caps (9)
F. Pro-Fill Tubing (5')
Important
they have been neglected and the
a e
h c
c
l l e
o s
l l a
p
t a l
s e
a
installing and using Pro-Fill to top
been neglected and then charging
can cause the water level to expand
in the loss of electrolyte. Once Pro-
Fill is installed, monthly topping
extremely low water level to occur.
3
Link manifolds/valves together with Pro-
Fill tubing.
Cut the desired length of
tubing from the open end of the included
A
1
e r
o c
e v
e r
. d
Remove existing vent covers and install
Pro-Fill valves by inserting into battery
and tuning ¼ rotation to lock into place.
4
the system. Do not connect more than six
B
D
E
C
Illustration purposes only. Actual product is subject to change.
2
Install the flexible manifold by carefully
pushing and rotating swivel tee into each
valve until it snaps into place.
5
Cover any remaining barbs with red end
F
BL-189
03/14
Advertisement
Summary of Contents for Flow-Rite Pro-Fill RV Edition
- Page 1 Package Contents A. Pro-Fill Valves (6) B. Flexible Manifolds (2) C. Quick Connect Coupler (1) D. Dust Cap (1) E. Red End Caps (9) F. Pro-Fill Tubing (5’) Illustration purposes only. Actual product is subject to change. Important they have been neglected and the l l e l l a t a l...
- Page 2 Important charging. Remove the dust cap from the water supply line and connect it to the squeeze couplers together. Immediately disconnect the squeeze bulb Any water remaining in the squeeze bulb When the bulb becomes hard, all cells are and replace the dust cap. full.