Alo Tech M-1 Quick Manual

Alo Tech M‐1 ‐ QUICK GUIDE
Thank you for buying this hands free Alo yes Life 01 device. This device allows you to receive
calls, listen to music, etc. while driving or practising your favourite sport.
This is a quick user's guide, for more information as well as a detailed manual, we recommend
you visit our website:
The packaging must contain the following articles. If this is not the case please contact the
shop where you bought this product:
‐ Alo Tech M‐1 device
‐ USB ‐ Micro‐USB Charging cable
‐ Spare mic foam
‐ Velcro
‐ Instruction Manual
The Alo Tech M‐1 device has just one button (a) to enable a simple yet effective use, it also has
a LED status light (b) located close to the microphone which will help you configure and use
the device.
TO CHARGE THE BATTERY
Charge the battery before using it for the first time and when you have not used it for a long
time.
In order to charge the device, connect the micro‐USB connector of the cable provided (c) to
the connector that is situated in the lower part of the microphone (d) and the other end of the
cable to a USB port of a computer, a car charger or a wall charger.
Once the device is charged, the red status light will turn off.
INSTALLATION
The Alo Tech M‐1 device must be installed as close as possible to your ear in order to
Guarantee optimal sound quality.
The device can be positioned on top of the side fabric of the helmet, with the help of the
Velcro strips provided, or can be placed under the side fabric and / or sponge of the helmet.
Bear in mind that if the sponge or fabric is very thick both the quality as well as the power of
the sound can be affected.
The microphone must be placed in a central position close to your mouth.