Do you have a question about the SILFH4524Z and is the answer not in the manual?
Questions and answers
Summary of Contents for SILENSYS SILFH4524Z
Page 1
MCB Protection AJ9513 4,0 A VC4A0007BAA 8,3 A 10,0 A compressors units FH4524 7,9 A VC4A0011BAA 12,3 A 16,0 A integrated in SILENSYS Condensing Units FH4525 7,3 A VC4A0011BAA 12,3 A 16,0 A AG4534 10,6 A VC4A0018FAA 27,0 A 25,0 A...
Page 2
Standard refrigeration parameter Skip output frequencies, Auto-Tuning In order to avoid continous operation at a Change during operation, settings high-- Resonance frequency 1 Para- Default speed that causes resonance in driven lighted in differ from default meter Range Setting machinary, the V1000 can be programmed Number: min.
Page 3
Low Pressure Bypass at Start Fault memory Description Cause / Action Fault: The integrated Low Pressure switch OFF can be bypassed at every new START command the V1000 is receiving. For safety reasons Current shorted to ground exceeded 50% motor current. Ground fault this function is not completley de-activated, it needs new settings Test of the V1000 without motor connected...
Page 4
Operation and Programming Monitor screens U1-XX Description Function: Mode: L3.1 Function of the operator (LED Display) Shows the value of the frequency reference. This reference Frequency Displays Reference* DIGITAL OPERATOR JVOP 182 is not used in the refrigeration software. reference Min.
Page 5
Modes for In- and Outputs Check-list Commissioning R3.1 Modes digital inputs S3 to S6 (h1-01 - h1-06) L4.1 Remarks: Description Function: Modes: The following list is not demanding any requirements for completeness. Qualified personal on site is responsible The V1000 is running the motor with the speed pro- Multi-step speed 1 that the equipment will comply with relevant standards grammed in parameter D1-02 (or h3-09 = mode 2) This...
Page 6
Mostly used standard-parameter I Mostly used Standard-Parameter II Change during operation, settings high-- Change during operation, settings high-- Para- Default Para- Default lighted in differ from default lighted in differ from default meter Range Setting meter Range Setting Number: min. max.
Need help?
Do you have a question about the SILFH4524Z and is the answer not in the manual?
Questions and answers