Location And Function Of Parts - Sony DSR-20/20P Operating Instructions Manual

Location and Function of Parts

Location and Function of Parts
Front Panel
1 Cassette compartment
2 ON/STANDBY switch
1 Display section
(see page 7)
3 Remote sensor
4 PHONES connector
5 PHONE LEVEL control knob
6 AUDIO INPUT LEVEL control knob
1 Cassette compartment
Accepts standard-size or mini-size DVCAM digital
videocassettes. When using a mini-size cassette, insert
it into the middle of the compartment.
For details of usable cassettes, see page 4.
2 ON/STANDBY switch
3 Remote sensor
4 PHONES connector (stereo minijack)
Connect stereo headphones for headphone monitoring
during recording or playback.
The audio signal you want to monitor can be selected
with the AUDIO MONITOR switch inside of the door
(3).
5 PHONE LEVEL control knob
Controls the volume of the headphones connected to
the PHONES connector.
10 EN
Chapter 1 Overview
DUP
COUNTER AUDIO
TIMER
INPUT
SELECT MONITOR
REMOTE
SELECT
TC CH-1/2 REPEAT
MENU
COUNTER MIX OFF
TAPE CH-3/4 REC
REMAIN LOCAL
SET
6 AUDIO INPUT LEVEL control knobs
When recording, you can use these knobs to set audio
input levels for CH-1 (channel 1) and CH-2,
respectively.
7 COUNTER RESET button
Press this button to reset the tape counter in the display
window to "0:00:00 (0
work when displaying the time code or the remaining
time.
8 EJECT button
7 COUNTER RESET
button
2 Tape transport
control section
(see page 8)
8 EJECT button
3 Inside of the door
(see page 9)
00 00 )". This button does not
H M S