Hamamatsu Photonics E717-74 Quick Start Manual

The E717-74 is a compact D type socket assembly designed
for 28 mm (1-1/8 inch) diameter side-on photomultiplier tubes (PMT).
The overall length is most short as compared to conventional type.
FEATURES
GPin Output
GCompact and Lightweight

SPECIFICATIONS

MAXIMUM RATINGS
Parameter
Supply Voltage between Case and Terminals
Supply Voltage between Power Supply Terminals
Divider Current (at -1500 V Supply Voltage)
Power Consumption (at -1500 V Supply Voltage)
Operating Ambient Temperature
Storage Temperature
CHARACTERISTICS (at 25 °C)
Parameter
Insulation Resistance between Case and Terminals
Leakage Current in Signal
Total Voltage Divider Resistance
Maximum Linear Output in DC Mode
Output Signal
Weight
NOTE: AAt -1000 V supply voltage between power supply terminals.
BThe current at which output of PMT deviates by ±5 % from the linearity.
Figure 1: Circuit Diagram
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2006 Hamamatsu Photonics K.K.
A
B
K
Dy1 Dy2 Dy3
SOCKET
11 1 2 3
PIN No.
R1 R2 R3 R4
R1 to R10
-HV (K)
C1 to C3
* "Wiring diagram applies when -HV is supplied."
To supply +HV,connect the pin "G" to+HV, and the pin "K" to the GND.
COMPACT D TYPE
SOCKET ASSEMBLY
E717-74
Description/Value
Description/Value
Min.
Max.
PMT
Dy4 Dy5 Dy6 Dy7 Dy8 Dy9
4 5 6 7 8
R5 R6 R7 R8 R9
C1 C2
: 330 kΩ
: 10 nF
1500
-1500
0.46
682
0 to +50
-15 to +60
1 × 10
11
1 × 10
-10
3.3
22
DC/Pulse
10
P
9 10
R10
C3
GND (G) SIGNAL
OUTPUT (A)
Unit
V
V
mA
mW
°C
°C
Unit
Ω
A
MΩ
µA
—
g
TACCC0134EA