What To Do If Your Appliance Does Not Work - Krups SCALECONTROL 5000 F8397010 Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4
control again: the weight displayed will flash
twice, then "0" will appear.
Example:
You want to weigh 1,245 grams:
press the "Tare/set" (calibration/setting)
control: "0000"is displayed, with the last
zero flashing.
press 5 times on the "ml/
display 5.
press the "kg/
" control, and the second
zero to the last digit will flash.
press 4 times on the "ml/
display 4.
press the "kg/
" control, the second zero
will flash.
press twice on the "ml/
display 2.
press the "kg/
" control, the first zero will
flash.
press once on the "ml/
display 1.
press the "Tare/set" (calibration/setting)
control: " 1245 " flashes twice and " 0 " is
then displayed.
place the ingredients in the container.
When the programmed weight "minus 10 g"
is reached, the scale gives an intermittent and
slow sound. When the programmed weight
has been reached within 1 g, the intermittent
sound accelerates. Then at "plus 10 g", it
again becomes intermittent and slow.
In this way, you can weigh a previously
programmed quantity of ingredients without
looking at the display.
. Changing and disposing of batteries
When the message "LO" is displayed, this is
an indication to change the batteries.
To dispose of them in complete safety,
you can return them to your retailer or
throw them into the special containers
provided by the local authorities. When the
appliance reaches the end of its life,
remember to remove the batteries before
disposing of it.
"control to
"control to
" control to
"control to
Cleaning
Clean the scale using a damp cloth.
The large bowl (b) and the bowl/lid (a) can
be washed in the dishwasher (top basket).
It is recommended that you clean the bowl/
lid, after use with food ingredients. Clean in
hot water with washing up liquid.
Turn the bowl/lid (a) upside down on the
base to facilitate storage.
What to do if your appliance
does not work?
If the message "LO" is displayed, change
the batteries.
If the message "Err" is continuously
displayed, or if the scale still does not work,
contact your nearest approved Krups service
centre (see list in the service booklet).
7

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Krups SCALECONTROL 5000 F8397010

Table of Contents