Related Manuals for Edwards & Co STA501
Summary of Contents for Edwards & Co STA501
- Page 1 INSTRUCTION MANUAL CARRY COT STA501 Keep for future reference. READ THESE INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE. Suitable from children 0 to 9 kg.
-
Page 2: Injury Or Death
WARNINGS ALWAYS FOLLOW THE MANUFACTURERS INSTRUCTIONS. READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE OF THIS CARRY COT. WARNING!: TO AVOID INJURY OR DEATH • DO NOT USE THE BASSINET ONCE THE CHILD CAN SIT UP UNAIDED. • THIS CARRY COT SHOULD ONLY BE PLACED ON A FIRM, LEVEL, DRY SURFACE OR CLICKED SECURELY INTO AN EDWARDS &... - Page 3 ASSEMBLY Remove the mattress and unzip the lining inside the cot. 2. Locate the two bars on top of the base inside the cot. Pull one of the bars into the housing as pictured. 3. Pull the second bar into it’s housing. 4.
- Page 4 COLLAPSING THE CARRY COT Remove the mattress and unzip the lining inside the cot. 2. Locate the two bars on top of the base inside the cot. Pull one of the bars out of the the housing (as pictured in the Assemly page).
- Page 5 STROLLER ATTACHMENT & REMOVAL Attaching To install the Carry Cot insert the tongues on the accessory into the stroller frame adapter housing. We only recommend installing the Carry Cot in reverse facing position (where baby looks at you). Removing There are two buttons located on the stroller frame, just underneath where the Carry Cot’s tongue connects .
-
Page 6: Care And Maintenance
CARE & MAINTENANCE Important information • We recommend storing your carry cot indoors to avoid corrosion. • NEVER get the mattress inner foam wet. If this gets wet, replace the mattress only with an approved Edwards & Co mattress. • To clean the mattress lining or cot lining, we recommend a warm wash (30 degress) in a normal wash (for front loaders) or gentle wash (for top loaders). -
Page 7: Warranty
WARRANTY All Edwards & Co products are guaranteed for two years from the date of purchase against defects in material and workmanship. If we determine that the product has a manufacturing fault, we will repair or replace it free of charge to you. The decision to repair or replace is solely at the discretion of Edwards &...