Instant Start; Weight Defrost; Time Defrost; Tips On Defrosting - Breville Diamond Wave LMO525 Instruction Book

INSTANT START

When the unit is in waiting state, press
START/+30 SEC to start cooking at 30
seconds with 100% microwave power. Each
additional press will increase the cooking time
by 30 seconds. The maximum cooking time is
99 minutes and 99 seconds.
Press START/+30 SEC once to start cooking,
LED will display 0:30.
Press START/+30 SEC again for 5 times, and
the cooking time will be 3 minutes.
There are additional instant start buttons
which are activated by pressing numbers 1 to 6.
NUMBER MICROWAVE
POWER
1 100%
2 100%
3 100%
4 100%
5 100%
6 100%
NOTE
During microwave time cook and time defrost,
time can be added by pressing START/30
SEC button. Always cook defrosted foods
immediately after thawing.

TIPS ON DEFROSTING

• The energy required for defrosting is much
less than for cooking as the microwave
causes the ice formed in the food to melt
rather than heat.
• Before defrosting meat in the microwave
oven, remove the freezer bag or wrapping
to prevent meat sitting in 'drip', which will
otherwise boil as the meat defrosts causing
meat to go grey and begin to stew. To remove
frozen meat from freezer wrappings, defrost
for a few minutes so the wrap is easy to
remove.
• Remove meat from Styrofoam tray as they are
not microwave-safe.
LMO525_ANZ_IB_B17.indd 19
• Place meat onto a microwave safe rack and a
drip tray to catch juices.
• Check the meat throughout the defrosting
time. As outer portions of meat thaw, remove
them. If the edges of meat feel warm, stop
microwaving and allow meat to stand for a
few minutes or until edges are cold again.
• After defrosting the meat, it must be cooked
right away. Don't leave it to stand for any
length of time at room temperature or in the
fridge.

WEIGHT DEFROST

Example: Defrost beef of 500g:
DURATION 1. Press WEIGHT DEFROST; LED will
display dEF1.
1 minute
2. Press 5, 0, 0 in order, the range of defrosting
weight is 100g–2000g. Press START/+30
2 minutes
SEC to start defrosting, time will be
3 minutes
displayed and countdown will start.
4 minutes
5 minutes
6 minutes

TIME DEFROST

1. Press the TIME DEFROST button, the LED
Screen will display dEF2.
2. Using the number pad, input the
defrosting time. The effective time range is
00:01~99:99
3. The default microwave power is power level
3 PL3. To change the power level, press
POWER once, and the LED screen will
display PL3, then use the number pad to
select the power level required.
4. Press the START/+30 SEC button to start
defrosting. The remaining cooking time will
be displayed.
19
31/07/2017 4:30 pm