Download Print this page
Supersonic SC-603 User Manual

Supersonic SC-603 User Manual

360 hdtv digital amplified motorized rotating antenna

Advertisement

Quick Links

360º HDTV Digital Amplified
Motorized Rotating Antenna
USER GUIDE
Specifications
+ Operation Frequency:
+ Gain:
+ Standing Wave Ratio:
+ Noise Parameter:
+ Impedence:
+ Operation Voltage:
+ Power:
+ Rotating Speed:
Set-Up Guide
(after last installation step)
1. Make sure the antenna has been assembled according to the
Figures to the right. Receiver connects to antenna.
2. After connecting the antenna to power, please press the
revolving button on the remote control. The antenna will begin
revolving. Please continue revolving the antenna until the TV
program reaches the best signal quality.
3. Turn off the power after you've found the best antenna position.
Copyright ©2015 Supersonic Inc. All rights reserved.
Features and specifications are subject to change without prior notification
Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth
defects or other reproductive harm.
Model#: SC-603
45 - 860MHz
25 - 35dB
< 1.5
< 2dB
75 Ω
AC110V ± 10% 60Hz
< 3W
4r / minute
ARIAL BOOM
"V" DIPOLE
"V" DIPOLE

Advertisement

loading

Summary of Contents for Supersonic SC-603

  • Page 1 3. Turn off the power after you’ve found the best antenna position. Copyright ©2015 Supersonic Inc. All rights reserved. Features and specifications are subject to change without prior notification Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth...
  • Page 2 Mount Antenna Outdoor on High Ground After you have assembled the antenna, place the antenna on a pole or stand as high as possible with enough clear- ance so the antenna can rotate safely. Run the antenna cable to your home/office, then install it to the device antenna control box.