Page 2
Introduction Getting to Know the Product SensorClick™ is a modular powerstrip and sensor system that allows you to use RJ11 sensor port any SensorClick advanced power strip with any SensorClick accessory device. Plug the motion sensor into this port. There will be a soft audible With an extensive and growing list of power strips and sensors, you can quickly ‘click’...
Page 3
Installation Instructions Programming the Countdown Timer The SensorClick motion sensor has a configurable countdown timer that has a default setting of 30 minutes. Step 1 Step 2 Step 3 To configure the countdown timer, press and hold the button on the side of the SensorClick motion sensor for 5 seconds until the red LED illuminates.
Page 4
Connected Device Warranty damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized TrickleStar will repair or replace, at its option, any devices which are damaged by a program, or device modification or alteration. This is the sole warranty of TrickleStar;...
Need help?
Do you have a question about the SensorClick TS1802MS and is the answer not in the manual?
Questions and answers