Page 1
HANGING CORDLESS LANTERN Model 92513 ASSEMBLY AND OPERATING INSTRUCTIONS ® TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com ® Copyright 2004 by Harbor Freight Tools .
Do not operate power products in explosive atmospheres, such as in the pres- ence of flammable liquids, gases, or dust. Power products create sparks which may ignite the dust or fumes. SKU 92513 For technical questions, please call 1-800-444-3353. Page 2...
Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the Lantern’s operation. If damaged, have the Lantern serviced before using. Many accidents are caused by poorly main- tained products. SKU 92513 For technical questions, please call 1-800-444-3353. Page 3...
WARNING: This product contains lead, which is a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.) SKU 92513 For technical questions, please call 1-800-444-3353. Page 4...
Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration. (See Figure A.) FIGURE A SKU 92513 For technical questions, please call 1-800-444-3353. Page 5...
If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Figure C.) SKU 92513 For technical questions, please call 1-800-444-3353. Page 6...
Page 7
FIGURE C to five volts at 150% of the rated amperes. SYMBOLOGY Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current Amperes No Load Revolutions xxxx/min. per Minute (RPM) SKU 92513 For technical questions, please call 1-800-444-3353. Page 7...
Page 8
Battery (13). When the unit is fully charged, immediately unplug the AC/DC Charger (14) from both the Lantern and the power outlet. FIGURE 1 Switch (6) Charging Socket (12) HIGH LED (5) SKU 92513 For technical questions, please call 1-800-444-3353. Page 8...
Page 9
Tug gently on the Lantern to make sure it is held securely. Turn the Switch (6) to HIGH or LOW. See FIGURE 1 on page 8. When you are finished using the Lantern, turn off the Switch (6). SKU 92513 For technical questions, please call 1-800-444-3353. Page 9...
Gently match the pins on the Bulb (1) with the holes on the Bulb Holder (11), and insert the Bulb back into the Bulb Holder (11). See FIGURE 3. Reassemble the Lantern. FIGURE 2 FIGURE 3 Bulb (1) Bulb (1) Bulb Holder (11) Bulb Holder (11) SKU 92513 For technical questions, please call 1-800-444-3353. Page 10...
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 92513 For technical questions, please call 1-800-444-3353. Page 11...
The AC/DC Charger (14) and the Cigarette Lighter Adapter (15) are not shown. NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 92513 For technical questions, please call 1-800-444-3353. Page 12...
Need help?
Do you have a question about the 92513 and is the answer not in the manual?
Questions and answers