Getting Started; Step 1: Hooking Up The System - Sony CMT-ED2U Operating Instructions Manual

Getting Started

Step 1: Hooking up the system

Follow steps 1 through 6 of the procedure below to hook up your system using the supplied cords and
accessories.
The speaker grille design differs somewhat from that of the U.S. and other models.
The U.S. model is used here for illustration purposes.
Rear cover
1 4
1
Remove the rear cover.
Push in on the tabs, pull downward,
and then lift off
4
Right speaker
5
U
2
U
6
2
Connect the speakers.
1 Connect the right and left speaker cords to
the SPEAKER terminals as shown below.
3
L
#
#
R
3
Note
Keep the speaker cords away from the
antennas to prevent noise.
Left speaker
3
Gray (3)
Black (#)
Insert this
portion